Page 73 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes
P. 73
Part Modeling
Alternatively, we can add the vertical relation by pre-selecting the origin and
the circle's center, and then selecting the "Vertical" relation from the pop-up
menu.
1.875
;----- (/) 3. 250
2.30. -Instead of making an extrusion like we did before, we are going to add
material using a different technique. After adding the Vertical geometric relation,
our sketch is fully defined and we need to exit the sketch. We'll use a different
feature called "Instant 3D" to make the extrusion. It is activated in the Features
tab in the Command Manager; if it is not already enabled, click to activate it.
Part1 *
File Edi1
~ / T8 TN T I Q~ s
I
Reference Cu
Exit D T<;;'b TO T Geometry lnstant3D
Sketch
B T0 ~ T
F --" _,.._r:_. _ _ ., . I - ·e d
' Exit Sketch i Enable dragging of handles,
1----! Exit this sketch and keep any changes. J dimensions, and sketches to
dynamically modify features.
~ I ~ 1
63
