Page 78 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

2.35. -In the next step we'll add the small boss at the right side of the 'Housing'.

Switch to a Right view using the View Orientation tool bar (Shortcut Ctrl+4 ), and

select the "Sketch" icon from the Command Manager's Sketch tab.

When asked to select a face to add the sketch, click in the rightmost face (or select

the face first and then click the Sketch command), draw a circle using the "Circle"

tool, and add the dimensions shown. Just as we did with the front cylindrical boss,

add a Vertical Relation between the center of the

circle and the part's origin. l. ~10 ~

Display/Delete R . Quick R .d
. epa1r ap1
Relat1ons Sketch Snaps Sketch
From the "Display/Delete Relations" drop-down

icon, click "Add Relation," select the circle's center I ~

and the origin, and add a "Vertical" relation between

them by selecting it in the "Add Relations" box.

Optionally, pre-select both and select "Make Vertical"

from the pop-up menu to fully define the sketch.

</) 1.000

.750

Select Sketch plane Draw circle & dimension it

(/) 1.000 -..

.750

When adding relations, if

you accidentally select

more entities than needed,

you can unselect them in the

screen, or delete them in the

selection box by clicking on them

and then pressing the "Delete"

key.

---~
------

Add vertical relation

68