Page 453 - Biomedical Engineering and Design Handbook Volume 2, Applications
P. 453

COMPUTER-INTEGRATED SURGERY AND MEDICAL ROBOTICS  431

                          86. Tockus, L., et al. “Computer-Aided Image-Guided Bone Fracture Surgery: Modeling, Visualization, and
                              Preoperative Planning,” in MICCAI ’98, 1998, Cambridge, Mass.
                          87. Verheyden, A., et al., “Percutaneous stabilization of dorsal pelvic ring fractures—transiliosacral screw
                              placement in the open MRI,” in First Annual Meeting of CAOS International, 2001, Davos, Switzerland.
                          88. Grutzner, P., et al., “Computer-aided reduction and fixation of long bone fractures,” in  First Annual
                              Meetings of CAOS International, 2001, Davos, Switzerland.
                          89. Suhm, N., et al., “Computer assisted distal locking of intramedullary implants: A controlled clinical study
                              including 84 patients,” in First Annual Meeting of CAOS International, 2001, Davos, Switzerland.
                          90. DiGioia,  A. M., B. Jaramaz, and R.  V. O’Toole, “An Integrated  Approach to Medical Robotics and
                              Computer  Assisted Surgery in Orthopedics,” in Proc. 1st Int. Symposium on Medical Robotics and
                              Computer Assisted Surgery, 1994. Pittsburgh.
                          91. Digioia,  A., et al., “Clinical Measurements of  Acetabular Component Orientation Using Surgical
                              Navigation Technologies,” in First Annual Meeting of CAOS International, 2001, Davos, Switzerland.
                          92. Kunz, M., et al., “Development and verification of a non-CT based total knee arthroplasty system for the
                              LCS prosthesis,” in First Annual Meeting of CAOS International, 2001, Davos, Switzerland.
                          93. Stulberg, S. D., P. Loan, and V. Sarin, “Computer-Assisted Total Knee Replacement Surgery: An Analysis
                              of an Initial Experience with the Orthopilot (TM) System,” in First Annual Meeting of CAOS International,
                              2001, Davos, Switzerland.
                          94. Saragaglia, D., et al., “Computer-Assisted Total Knee Replacement Arthroplasty: comparison with a con-
                              ventional procedure. Results of a 50 cases prospective randomized trial,” in First Annual Meeting of CAOS
                              International, 2001, Davos, Switzerland.
                          95. Wirth, S., et al., “C-arm based computed tomography: A comparative study,” in Proc. of the 15th Conf. on
                              Computer-Aided Radiology and Surgery, 2001, Elsevier, Berlin.
                          96. Shahidi, R., “Advances in video laparoscopic surgery using three-dimensional image enhanced
                              endoscopy,” MDVista Journal, 2000, May, pp. 56–65.
                          97. Grimson, W. E. L., et al., “An automatic registration method for frameless stereotaxy, image guided surgery
                              and enhanced reality visualization,” IEEE Trans. on Medical Imaging, 1996, 15(2):129–140.
                          98. Ecke, U., et al., “Virtual Reality: preparation and execution of sinus surgery,” Computer-Aided Surgery,
                              1998, 4(2):45–50.
                          99. Peterman, J., et al., “Implementation of the CASPAR System in the reconstruction of the  ACL,” in
                              CAOS/USA, 2000, Shadyside Hospital, Pittsburgh.
                          100. Wiesel, U., et al., “Total Knee Replacement Using the Robodoc System,” in Proc. First Annual Meeting of
                              CAOS International, 2001, Davos, Switzerland.
                          101. Tenbusch, M., et al., “First results using the Robodoc system for total knee replacement,” in First Annual
                              Meeting of CAOS International, 2001, Davos, Switzerland.
                          102. Mai, S., C. Lorke, and W. Siebert, “Motivation, Realization, and First Results of Robot Assisted Total Knee
                              Arthroplasty,” in Proc. 1st Annual Meeting of CAOS International. 2001, Davos, Switzerland.
                          103. Garbini, J. L., et al., “Robotic Instrumentation in Total Knee Arthroplasty,” in Proc. 33rd Annual Meeting,
                              orthopedic Research Society, 1987, San Francisco.
                          104. Fadda, M., et al., “Computer-Assisted Knee Arthroplasty at Rizzoli Institutes,” in Proc. 1st International
                              Symposium on Medical Robotics and Computer Assisted Surgery, 1994, Pittsburgh.
                          105. Kienzle, T. C., et al., “An integrated CAD-robotics system for total knee replacement surgery,” in Proc.
                              IEEE Int. Conf. on Robotics and Automation, 1993, Atlanta.
                          106. Leitner, F., et al., “Computer-assisted knee surgical total replacement,” in Proc. First Joint Conference of
                              CVRMed and MRCAS, 1997, Grenoble, France, Springer.
                          107. Marcacci, S., et al., “Computer-Assisted Knee Arthroplasty,” in Computer-Integrated Surgery, R. H. Taylor
                              et al. (eds.), 1996, MIT Press, Cambridge, Mass. pp. 417–423.
                          108. Cinquin, P., et al., “IGOR: Image Guided Operating Robot,” Innovation et Technonogie en Biologie
                              et Medicine, 1992, pp. 374–394.
                          109. Lavallee, S., et al., “Image-Guided Operating Robot: A Clinical Application in Stereotactic Neurosurgery,”
                              in Computer-Integrated Surgery, R. H.  Taylor et al. (eds.), 1996, MIT Press, Cambridge, Mass.,
                              pp. 343–352.
   448   449   450   451   452   453   454   455   456   457   458