Page 554 - Cam Design Handbook

THB16 9/19/03 8:04 PM Page 542

542 CAM DESIGN HANDBOOK

• For high-level demands improved control of heat treatment and foundry production is
suggested.
• Tolerances of fabrication should be ±0.0001 to ±0.0005 inch.
• Lubricant and additive plus the lubrication system must be chosen properly with
experience.
• Frequent communication with the driver of the automobile is suggested.

REFERENCES

Hubbard, D., “Camshaft Reference Handbook,” Don Hubbard, Publisher, Ft. Myers, Fla., 2000;
dhubbard@peganet.com
Dour, J., Megacycle, San Rapael, Calif. Personal communication, 2002.
Crane, H., formerly of Crane Corporation, Daytona Beach, California. Personal communication, 2000.