Page 407 - Compression Machinery for Oil and Gas

Upstream Compression Applications Chapter 8 385

References
[1] R. Kurz, K. Brun, Upstream and midstream compression applications—Part 1: applications,
in: Proceedings of ASME Turbo Expo, Paper GT2012-68005, Copenhagen, Denmark, 2012.
[2] P.C. Rasmussen, R. Kurz, Centrifugal compressor applications, in: Proceedings of 38th
Turbomachinery Symposium, Houston, TX, 2009.
[3] GPSA, Engineering Data Book, 12th ed., GPSA, Tulsa, OK, 2004.
[4] M. Pinelli, A. Mazzi, G. Russo, Arrangement and optimization of turbocompressors in an off-
shore natural gas extractions station, in: Proceedings of ASME Turbo Expo, Paper GT2005-
68031, 2005.
[5] Gilbert, W.E. (1954), Flowing and Gas-Lift well performance, API Paper No. 801-30H.
[6] Schlumberger, Gas Lift, Article. Available from: http://petrowiki.org/Gas_lift, 2018(accessed
31.05.18).
[7] U.S. Department of Energy, Enhanced Oil Recovery, Available from: https://energy.gov/fe/
science-innovation/oil-gas-research/enhanced-oil-recovery, 2018 (accessed 31.05.18).
[8] R. Kurz, S. Ohanian, K. Brun, Compressors in high pressure pipeline applications,
in: Proceedings of ASME Turbo Expo, Paper GT2010-22018, 2010.
[9] ANSI/NACE MR0175, Petroleum and Natural Gas Industries—Materials for Use in H2S-
containing Environments in Oil and Gas Production—Parts 1, 2 and 3, 2003.
[10] F. Bauer, The influence of liquids on compressor valves, in: Proceedings of International Com-
pressor Engineering Conference, Paper 757, Purdue University, 1990.
[11] T.C. Allison, K. Brun, Oil stiction in compressor valves: modeling & mitigation,
in: Proceedings of Gas Machinery Conference, Atlanta, GA, 2009.
[12] D. Ransom, L. Podesta, M. Camatti, M. Wilcox, M. Bertoneri, M. Bigi, Mechanical perfor-
mance of a two stage centrifugal compressor under wet gas conditions, in: Proceedings of Tur-
bomachinery Symposium, Houston, TX, 2011.
[13] Day, M. and Allison, T.C. (2016), “Analysis of historical dry gas seal failure data,” Proceed-
ings of ASME Turbo Expo, Paper #GT2016-57076, Seoul, South Korea.
[14] R. Kurz, R.C. White, K. Brun, Upstream and midstream compression applications—part 2:
implications on operation and control of the compression equipment, in: Proceedings of ASME
Turbo Expo, Paper GT2012-68006, Copenhagen, Denmark, 2012.