Page 141 - Electric Drives and Electromechanical Systems

134 Electric Drives and Electromechanical Systems

What are the environmental constraints at the location where the measurement
system will be installed?
How will the derived information be integrated into the system? The answer to this
question will depend on the controller selected, and this question may need to be
addressed at the completion the selection procedure.
The encoder or transducers which are selected will have a major effect on overall
system performance; for if the wrong measurement is made, the system will never be
able to produce the required result.

References
Harding, K., 2013. Optical metrology overview. In: Harding, K. (Ed.), Handbook of Optical Dimensional
Metrology. CRC Press, Boca Raton, pp. 3e35.
Mayr, J., et al., 2012. Thermal issues in machine tools. CIRP Annals - Manufacturing Technology 61 (2),
771e791. https://doi.org/10.1016/j.cirp.2012.05.008.
Mutilba, U., et al., 2017. Traceability of on-machine tool measurement: a review. Sensors 17 (7). https://
doi.org/10.3390/s17071605.
Schwenke, H., et al., 2008. Geometric error measurement and compensation of machines-An update.
CIRP Annals e Manufacturing Technology 57 (2), 660e675. https://doi.org/10.1016/j.cirp.2008.09.
008.
Smith, G., 2016. Machine Tool Metrology: An Industrial Handbook. Springer Nature, Switzerland.