Page 337 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 337
322 Finite Element Modeling and Simulation with ANSYS Workbench
Click on Tabular Data on the right edge of the Graphics window, and then click
on the push pin labeled AutoHide to display the Tabular Data window as
shown below. Enter the following values in the Tabular Data table.
Step 5: Apply Convective Boundary Condition
Right-click on Transient Thermal (B5). Choose Insert and then Convection from
the context menu. In the Details of “Convection”, enter 30 W/(m ⋅ °C) for
2
Film Coefficient and 28°C for Ambient Temperature to all surfaces (a total of
29 faces) except for the base of the heat sink.