Page 339 - Finite Element Modeling and Simulations with ANSYS Workbench

324 Finite Element Modeling and Simulation with ANSYS Workbench

Click on Directional Heat Flux to review the heat flux isolines along Y-axis.

Modeling tips: In the case study, an end time of 180 seconds is specified in the
transient setup. By default, the last set of results (solution at 180s) from the
transient analysis is used for graphics window display. To display results at
a different time point, e.g. temperature distribution at 40 seconds, you may
change the Display Time from Last to 40 s in the Details of “Temperature”.
Then right click on Solution (B6) and select Evaluate All Results. A result at
the specified time will be displayed at the Graphics Window as shown below.