Page 446 - Handbook of Electrical Engineering

16

Computer Based Power Management

Systems

16.1 INTRODUCTION

Modern power systems that are self-sufficient with their own turbine generators are often equipped
with a computer based power management system (PMS). The main purpose of this system is to
enable the generators to be operated at high load factors i.e. 85 to 90%. Operating the generators at
high load factors has two main advantages:
• The most economic fuel consumption is obtained.
• In some situations less generators need to be installed, especially in old plants where load growth
has occurred.
In addition there are other benefits which become available when a PMS is included in the
power system:
• Improved range and accuracy of plant measurements and display.
• Improved range and types of alarms, messages and event recording.
• Better control by the control room personnel.
• Greater confidence in the performance of the plant.
• Addition of special technical facilities, e.g. auto-synchronising, condition monitoring, managing
the tap-changing of transformers.
• Communication with SCADA systems.
• Data logging, trending and archiving.

The power system is the ‘life-blood’ of the whole plant and therefore it must have high
availability and high reliability. A well-designed PMS will enable the highest performance to be
achieved in these respects. A PMS should be considered as an essential requirement in a modern plant.

16.2 TYPICAL CONFIGURATIONS
The PMS central computer and its input and output signal interfaces should all be located in one self-
contained unit. If for some reason this cannot be achieved then these functions could be included in

Handbook of Electrical Engineering: For Practitioners in the Oil, Gas and Petrochemical Industry. Alan L. Sheldrake
 2003 John Wiley & Sons, Ltd ISBN: 0-471-49631-6