Page 126 - Handbook of Materials Failure Analysis

References 121

[42] Sanches Jr. F, Venturini WS. Damage modelling of reinforced concrete beams. Adv Eng
Softw 2007;38:538–46.
[43] Crank J. The mathematics of diffusion. 2nd ed. Oxford, London: Clarendon Press; 1975,
414 pp.
[44] Dhir RK, Jones MR, NG SLD. Prediction of total chloride content profile and
concentration/time-dependent diffusion coefficients for concrete. Mag Concr Res
1998;50:37–48.
[45] Stewart MG, Rosowsky DV. Structural safety and serviceability of concrete bridges sub-
ject to corrosion. J Infrastruct Sys ASCE 1998;4:146–55.
[46] Tuutti K. Corrosion of steel in concrete. Stockholm: Swedish, Cement and Concrete
Research Institute; 1982.
[47] Vecchio FJ, Emara MB. Shear deformations in reinforced concrete frames. ACI Struct J
1992;89(01):46–56.
[48] Guner S. Performance assessment of shear-critical reinforced concrete plane frames.
PhD Thesis, University of Toronto, Toronto, 429 p.; 2008.
[49] La Borderie C, Mazars J, Pijaudier-Cabot G. Response of plain and reinforced concrete
structures under cyclic loadings. Cachan, France, Laboratoire de Me ´canique et Techno-
logie, Rapport Interne, n.123; 1991.
[50] Castel A, Franfois R, Arliguie G. Mechanical behaviour of corroded reinforced concrete
beams—part 1: experimental study of corroded beams. Mater Struct 2000;33:539–44.
[51] Biondini F, Vergani M. Damage modeling and nonlinear analysis of concrete bridges
under corrosion, In: 6th International conference on bridge maintenance, safety and man-
agement (IABMAS 2012), Stresa, Italy, July 8–12Balkema/London: CRC Press/Taylor
& Francis; 2012.