Page 190 - Handbook of Materials Failure Analysis

186 CHAPTER 7 Investigation of failure behavior of tubular components

[18] Bertsch J, Hoffelner W. Crack resistance curve determination of tube cladding material.
J Nucl Mater 2006;352:116–25.
[19] Samal MK, Sanyal G, Chakravartty JK. Estimation of fracture behavior of thin walled
nuclear reactor fuel pins using pin-loading-tension test setup. Nucl Eng Des
2010;240:4043–50.
[20] ASTM standard E 1820-13. Standard test method for measurement of fracture toughness.
03.01.2013.
[21] Samal MK, Sanyal G, Chakravartty JK. Experimental and numerical study of fracture
behaviour of tubular specimens in a pin-loading-tension setup. J Mech Eng Sci
2010;224(1):1–12.
[22] Samal MK, Sanyal G. A load-separation technique to evaluate crack growth and resis-
tance behavior of thin walled axially cracked tubular specimen. J Mech Eng Sci 2011;226
(1):1447–61.
[23] Sanyal G, Samal MK. Fracture behavior of thin walled zirconium fuel clad tubes of
Indian pressurized heavy water reactor. Int J Fract 2012;173:175–88.
[24] Sanyal G, Samal MK, Ray KK, Chakravartty JK, Suri AK, Banerjee S. Prediction of J–R
curves of thin-walled fuel pin specimens in a PLT setup. Eng Fract Mech
2011;78:1029–43.
[25] Sanyal G, Samal MK. Assessment of axial cracking of a steam generator tube. J Metall
Eng 2012;1(2):53–62.
[26] Sanyal G, Samal MK, Samanta S, Aswal DK. Characterization of axial cracking mor-
phology of Zircaloy cladding tubes. Int J Nucl Energy Sci Eng 2013;3(2):40–5.
[27] Sanyal G, Samal MK. A geometry dependent generalized shape function for calculation
of stress intensity factor for axially cracked thin-walled tubes. Int J Adv Struct Eng
2014;6(2):1–11.
[28] Roos E, Eisele U, Silcher H. A procedure for the experimental assessment of the
J-integral by means of specimens of different geometries. Int J Press Vessel Pip
1986;23:81–93.
[29] Herrera R, Landes JD. A direct J-R curve analysis of fracture toughness tests. ASTM J
Test Eval 1988;16(5):427–49.
[30] Landes JD, Herrera R. A new look at J-R curve analysis. Int J Fract 1988;36:9–14.
[31] Landes JD, Zhou Z, Lee K, Herrera R. Normalization method for developing J-R curves
with the LMN function. ASTM J Test Eval 1991;19(4):305–11.
[32] Sharobeam MH, Landes JD. The load separation criterion and methodology in ductile
fracture mechanics. Int J Fract 1991;47(2):81–104.
[33] Sharobeam MH, Landes JD. The load separation and η pl development in pre-cracked
specimen test records. Int J Fract 1993;59(3):213–26.
[34] Dzugan J, Viehrig HW. Application of the normalization method for the determination of
J-R curves. Mater Sci Eng 2004;A387–A389:307–11.