Page 180 - MEMS Mechanical Sensors

7.9 Future Devices 169

[8] Sharpe, W. N., “Mechanical Properties of MEMS Materials,” in The MEMS Handbook,
M. Gad-el-Hak, (ed.), Boca Raton, FL: CRC Press, 2002, pp. 3.6–3.16.
[9] Biagiotti, L., et al., “A New Stress Sensor for Force/Torque Measurements,” Proc. IEEE
Int. Conf. on Robotics and Automation, Vol. 2, Washington, D.C., May 11–15, 2002,
pp. 1655–1660.
[10] Hachol, A., and R. Dzik, “Metrological Properties Study of a Planatic Tonometric Trans-
ducer Operating with Micromachined Force Sensor,” Conference Optoelectronic and Elec-
tronic Sensors II, Szczyrk, Poland, May 13–16, 1996, SPIE, Vol. 3054, 1996, pp. 104–110.
[11] Gass, V., et al., “Micro-Torque Sensor Based on Differential Force Measurement,” Proc.
IEEE Workshop on Micro Electro Mechanical Systems, Oiso, Japan, January 25–28, 1994,
pp 241–244.
[12] Wiegerink, R., et al., “Quasi-Monolithic Silicon Load Cell for Loads up to 1000 kg with
Insensitivity to Non-Homogeneous Load Distributions,” Sensors and Actuators, Vol. A80,
No. 2, 2000, pp. 189–196.
[13] Shinko Denshi, “Vibra,” http://www.atimco.dk/shinko_denshi/hvorforstemmegaffel.htm,
November 2003.
[14] Weigh-Tronix, “Quartzell Technology,” http://www.wt-nci.com/innovations.html,
November 2003.
[15] Whitehead, N., B. E. Jones, and D. Rees, “Non-Contact Torque Measurement on a Rotat-
ing Shaft Incorporating a Mechanical Resonator,” in Sensors and Their Applications X, N.
M. White and A. T. Augousti, (eds.), Bristol, England: Institute of Physics Publishing, 1999.
[16] Hauptmann, P., “Resonant Sensors and Applications,” Sensors and Actuators, Vol. A26,
No. 1–3, 1991, pp. 371–377.
[17] Bailleu, A., and W. Thelen, “Doppelplattenresonanzsensor zur Kraftmessung,” Conf.
SENSOR 97, Nuremberg, Germany, May 13–15, 1997, Vol. A5.1, pp. 7–12.
[18] Greenwood, J. C., “Silicon in Mechanical Sensors,” J. Phys. E: Sci. Instrum., Vol. 21, 1988,
pp. 1114–1128.
[19] Greenwood, J. C., “Miniature Silicon Resonant Pressure Sensor,” IEE Proc., Pt. D, Vol.
135, No. 5, 1988, pp. 369–372.
[20] Tilmans, H. A. C., M. Elwenspoek, and J. H. J. Fluitman, “Micro Resonant Force Gauges,”
Sensors and Actuators, Vol. A30, No. 1–2, 1992, pp. 35–53.
[21] Esashi, M., “Resonant Sensors by Silicon Micromachining,” Proc. IEEE Int. Frequency
Control Symposium, Honolulu, HI, June 5–7, 1996, pp. 609–614.
[22] Yan, T., et al., “Thick-Film PZT-Metallic Triple Beam Resonator,” Electronics Letters,
Vol. 39, No. 13, 2003, pp. 982–983.
[23] Spooncer, R. C., B. E. Jones, and G. S. Philp, “Hybrid and Resonant Sensors and Systems
with Optical Fiber Links,” J. Institution of Electronic and Radio Engineers, Vol. 58, No. 5,
1988, pp. S85–S91.
[24] Roessig, T., A. P. Pisano, and R. T. Howe, “Surface-Micromachined Resonant Force Sen-
sor,” Proc. ASME International Mechanical Engineering Congress and Exposition, Part 2
(of 2), San Francisco, CA, November 12–17, 1995, ASME Dyn. Syst. Control Div. Publ.
DSC, Vol. 57, No. 2, 1995, pp. 871–876.
[25] Cheshmehdoost, A., and B. E. Jones, “Design and Performance Characteristics of an Inte-
grated High-Capacity DETF-Based Force Sensor,” Sensors and Actuators, Vol. A52, No.
1–3, 1996, pp. 99–102.
[26] Haueis, M., et al., “Packaged Bulk Micromachined Resonant Force Sensor for High Tem-
perature Applications,” Conf. Design, Test, Integration, and Packaging of
MEMS/MOEMS, Paris, France, May 9–11, 2000, SPIE, Vol. 4019, 2000, pp. 379–388.
[27] Morten, B., G. De Cicco, and M. Prudenziati, “A Novel Torque Sensor Based on Elastic
Waves Generated and Detected by Piezoelectric Thick Films,” Sensors and Actuators, Vol.
A41, No. 1–3, 1994, pp. 33–38.