Page 374 - MEMS and Microstructures in Aerospace Applications

Osiander / MEMS and microstructures in Aerospace applications DK3181_c016 Final Proof page 367 1.9.2005 12:56pm

Microelectromechanical Systems and Microstructures in Aerospace 367

4. Neul, R., Modeling and simulation for MEMS design, industrial requirements, Presented
at International Conference on Modeling and Simulation of Microsystems — MSM
2002, Cambridge, MA, April 21–25 2002, 2002.
5. Kolpekwar, A. and Blanton, R.D., Development of a MEMS testing methodology,
Presented at IEEE International Test Conference, Washington, D.C., November 3–5
1997.
6. Delak, K.M. et al., Analysis of manufacturing scale MEMS reliability testing, in Pro-
ceedings of SPIE MEMS Reliability for Critical and Space Applications, 3880, 165,
September 21–22, 1999.
7. Grumman Corporation, Electrical, electronic, and electromechanical parts de-rating and
end of life guidelines, Appendix J. SSP 30312, Grumman Space Station Support, August
1990.
8. Schropfer, G. et al., Designing manufacturable MEMS in CMOS compatible processes
— Methodology and case studies, Presented at MEM, MOEMS, and Micromachining,
Strasbourg, France, April 29–30, 2004.
9. Juneidi, Z. et al., MEMS synthesis and optimization, Presented at Design, Test, Integra-
tion, and Packaging of MEMS/MOEMS, April 25–27, 2001.
10. NASA Goddard Space Flight Center, Materials Code 301.
11. NASA Goddard Space Flight Center, GEVS-SE General environmental verification
specification for STS &: ELV payloads, subsystems, and components, January 1990.
12. Loftus, J.P., and Teixeria, C., Launch Systems, in Space Mission Analysis and Design,
Larson, W.J., and Wertz, J., Eds, Microcosm, Inc. and Kluwer Academic, Torrance, CA,
1992.
13. Reeves, E., Spacecraft manufacture and test, in Space Mission Analysis and Design,
Larson, W.J., and Wertz, J., Eds, Microcosm, Inc. and Kluwer Academic, Torrance, CA,
1992.

© 2006 by Taylor & Francis Group, LLC