Page 305 - Marine Structural Design

Chapter 13 Collapse Analysis of Ship Hulls 281

3. Bai, Y. & Pedersen, P. Temdrup, (1991), “Earthquake Response of Offshore Structures”,
Proceedings of the 10th Offshore Mechanics and Arctic Engineering Conference,
OMAEPI, Vol. 1, Part B, Stavanger, pp. 571-578.
4. Bai, Y. & Pedersen, P. Temdrup, (1993), “Elastic-Plastic Behaviour of Offshore Steel
Structures Under Impact Loads”, Internat. J. Impact Engng, 13(1) pp.99-115.
5. Bai, Y., (1991), “SANDY - A Structural Analysis Program for Static and Dynamic
Response of Nonlinear Systems. Theoretical Manual and Demonstration Problem
Manual”, Version 2. Department of Ocean Engineering, The Technical University of
Denmark, August 199 1.
6. Bai, Y. (2001), “Pipelines and Risers”, Elsevier Science Ocean Engineering Book Series.
7. Bathe, L, (1 982), ‘<Finite Element Procedures in Engineering Analysis”, Prentice-Hall,
Englewood Cliffs, NJ, pp. 200-2 10.
8. Bendiksen, E., (1 992), “Hull Girder Collapse”, Ph.D. Dissertation, Department of Naval
Architecture and Offshore Engineering, The Technical University of Denmark.
9. Bergan, P. G. & Sorelde, T. H., (1978), “Solution of Large Displacement and Instability
Problems Using the Current Stiffness Parameter”, In “Finite Elements in Nonlinear
Mechanics”, ed. P. G. Bergan, et al. Tapir, pp. 647-699.
10. Burdekin, F. M. & Dawes, M. G., (1971), “Practical Use of Linear Elastic and Yielding
Fracture Mechanics With Particular Reference to Pressure Vessels”, In Proceedings of
the Institute of Mechanical Engineers Conference, London, May 1971.
11. Caldwell, J. B., (1965), “Ultimate Longitudinal Strength”, Trans. Royal Inst. Nav. Arch.,
107, (1965) 41 1-430.
12. Carlsen, C. A., (1977), “Simplified Collapse Analysis of Stiffened Plates”, Norwegian
Maritime Research, 5(4) pp. 20-36.
13. Chen, Y. K., Kutt, L. M., Plaszczyk, C. M. & Bieniek, M. P., (1983), ‘Vltimate Strength
of Ship Structures”, Trans. SOC. Nav. Arch. and Marine Engrs., 91 pp. 149-168.
14. Evans, J.H., (1 974), “Ship Structural Design Concepts”, Come11 Maritime Press.
15. Faulkner, D., (1975), “A Review of Effective Plating for Use in the Analysis of
Stiffened Plating in Bending and Compression”, J. Ship Research, 19(1) pp. 1-17.
16. Faulkner, D., (1 976), “Compression Test on Welded Eccentrically Stiffened Plate
Panels”, In “Steel Plated Structures”, ed. P.J. Dowling, J.E. Harding & P.A. Frieze.
Crosby Lockwood Staples, London.
17. Faullmer, D. and Sadden, J.A. (1979), “Toward a Unified Approach to Ship Structural
Safety”, Trans. RMA, V01.121, pp. 1- 38.
18. Frieze, P.A. and Lin, Y.T. (1991), “Ship Longitudinal Strength Modeling for Reliability
Analysis”, Proc. of the Marine Structural Inspection, Maintenance, and Monitoring
Symposium, SSCKNAME, pp.III.C.
19. Ghose, DJ et al. (1995), “Residual Strength of Marine Structures”, Ship Structure
Committee, SSC-381.
20. Guedes Soares, C and Garbatov, Y. (1996), “Fatigue Reliability of the Ship Hull
Girders”, Marine Structures, 9: 495-5 16.