Page 306 - Marine Structural Design

282 Part II Ultimate Strength

21. Guedes Soares, C and Garbatov, Y. (1999), “Reliability of Corrosion Protected and
Maintained Ship Hulls Subjected to Corrosion and Fatigue”, Joumal of Ship Research,
43~2 65-78.
22. Hughes, 0. (1983), “Ship Structural Design ”, A Rationally Based, Computer Aided,
Optimization Approach”, John Wiley & Sons, New York, pp. 432-436.
23. Ito, H., Kondo, K., Yoshimura, N., Kawashima, M. & Yamamoto, S. (1984), “A
Simplified Method to Analyse the Strength of Double Hulled Structures in Collision”, J.
SOC. Nav. Arch. Japan, 156 pp. 283-296.
24. Kinkead, A. N. (1980), “A Method for Analysing Cargo Protection Afforded by Ship
Structures in Collision and Its Application to an LNG Carrier”, Trans. Royal Inst. Nav.
Arch., 122 pp. 299-323.
25. Mansour, A. and Faulkner, D. (1 973), “On Applying the Statistical Approach to Extreme
Sea Loads and Ship Hull Strength”, RINA Trans, Vol. 115, pp. 277-3 13.
26. Mansour, A. E. & Thayamballi, A. (1980), “Ultimate Strength of a Ship’s Hull Girder
Plastic and Buckling modes”, SSC Report-299, Ship Structure Committee.
27. Mansour, A. (1997), “Assessment of Reliability of Ship Structures”, SSC-398, Ship
Structures Committee.
28. MeDermott, J. F., Kline, R. G., Jones, E. J., Maniar, N. M. & Chang, W. P., (1974),
“Tanker Structural Analysis for Minor Collisions”, Trans. SOC. Nav. Arch. and Marine
Engrs, 82,382-416.
29. Nishihara, S., (1984), “Ultimate Longitudinal Strength Modeling”, Naval Architecture
and Ocean Engineering (SNAJ Publication), 22, pp. 200-216.
30. Paik, J. K., (1990, 1991) “Ultimate Longitudinal Strength-Based Safety and Reliability
Assessment of Ship’s Hull Girder”, J. SOC. Nav. Arch. Japan, 168 (1990) 395-407 and
169 (1991) 403-416.
31. Pedersen, P. Terndrup & Jensen, J. Juncher, (1983), “Strength Analysis of Maritime
Structures, Part 2 Numerical Methods”, Den Private Ingeniorfond, Copenhagen, 1983 (in
Danish).
32. Rahman, M K and Chowdhury, M. (1996), “Estimation of Ultimate Longitudinal
Strength of Ships and Box Girders”, Journal of Ship Research, 40: pp.244-257.
33. Rutherford, S E and Caldwell, J B. (1990), “Ultimate Longitudinal Strength of A Ship’s
Hull”, T~s. SNAME, pp.441-471 (Val. 98).
34. Smith, C S, (1975), “Compressive Strength of Welded Steel Ship Grillages”, Trans.
RINA, 117(1975), pp. 325-359.
35. Smith, C. S., (1977), “Influence of Local Compressive Failure on Ultimate Longitudinal
Strength of a Ship’s Hull”, Proc. of International Symposium on Practical Design in
Shipbuilding (PRADS). Society of Naval Architects of Japan, Tokyo, Oct. 1977, pp.
73-79.
36. Smith, C. S., (1981), “Imperfection Effects and Design Tolerances in Ships and Offshore
Structures”, Trans. Inst. Engrs, Shipbuilder Scotland, 124 (1981) 37-46.
37. Sun, H.H. and Bai, Y. (2001), “Time-Variant Reliability of FPSO Hulls”, Trans. SOC.
Nav. Arch. and Marine Engrs., Vol. 109.