Page 307 - Marine Structural Design

Chapter I3 Collapse Analysis of Ship Hulls 283

38. Smeide, T.H., (1981), “Ultimate load analysis of marine structures”, Tapir, Trondheim,
1981.
39. Ueda, Y., Rashed, S. M. H. & Paik, J. K., (1984, 1986), “Plates and stiffened plate units
of the Idealized Structural Unit Method”, J. SOC. Nav. Arch. Japan 156 (1984) 366-377
and 160 (1.986) 3 18-36 (in Japanese).
40. Ueda, Y. & Yao, T., (1982), “The Plastic Node Method: A new method of plastic
analysis”, Comput. Meths. Appl. Mech. Engng, 34 1089-106.
41. Valsghd, S. & Pettersen, E., (1982), “Simplified nonlinear analysis of shiphhip
collisions”, Norwegian Maritime Research, lO(3) pp. 2-17.
42. Valsghd, S. & Steen, E., (1991), “Ultimate hull girder strength margins in present class
requirements”, The Marine Structural Inspection, Maintenance and Monitoring
Symposium, I11 B-1-19, Society of Naval Architects and Marine Engineers, Arlington,
VA, 1991.
43. Vasta, J. (1958), “Lessons Learned From Full-scale Structural Tests”, Trans SNAME,
Vol. 66, pp. 165-243.
44. Van Mater, P. R., Glannotti, J. G., Jones, N. & Genalls, P., (1979), “Critical Evaluation
of Low Energy Ship Collision-Damage Theories and Design Methodologies”, Vol. 11
SSC Report-285, Ship Structure Committee, Washington, April 1979.
45. Viner, A.C. (1986), “Development of Ship Strength Formulation”, Proc. of Int, Conf. On
Advanced in Marine Structures, Elsevier, pp. 152-173.
46. Xu, X D., Cui, W. et al. (2000), “An Experimental and Theoretical Study on Ultimate
Strength of A Box Girder”, Journal of Ship Mechanics, 45: pp.36-43.
47. Yao, T and Nikolov, P I. (1991, 1992), “Progressive Collapse Analysis of a Ship’s Hull
under Longitudinal Bending (1st and 2nd Reports)”, J. SNAJ , 171(1991): 449-461 and
172(1992): 437-446.
48. Yao T et a1.(2000), “Ultimate Hull Girder Strength”, ISSC Special Task Committee,
V1.11. Proc. 14th, Nagasaki, Japan.
49. Yamamoto, N. (1 998), “Reliability Based Criteria for Measures to Corrosion”, Proc.17th
OMAE’98, New York, USA: ASME.