Page 321 - Microsensors, MEMS and Smart Devices - Gardner Varadhan and Awadelkarim

REFERENCES 301

Gardner, J. W. (1989). "A diffusion-reaction model of electrical conduction in tin oxide gas
sensors," Semicond. Sci Technol., 4, 345-350.
Gardner, J. W. (1994). Microsensors: Principles and Application, John Wiley & Sons, Chichester.
Gardner, J. W. (1995). "Intelligent gas sensing using an integrated sensor pair," Sensors and Actu-
ators B, 27, 261–266.
Gardner, J. W. et al. (1995). "Integrated chemical sensor array for detecting organic solvents,"
Sensors and Actuators B, 26, 135–139.
Gardner, J. W. and Bartlett, P. N. (1999). Electronic Noses: Principles and Applications, Oxford
University Press, Oxford.
Geballe, T. H. and Hull, G. W. (1955). "Seebeck effect in silicon," Phys. Rev, 98, 940–947.
Geiger, W. et al. (1998). "New design of micromachined vibrating rate gyroscope with decoupled
oscillation modes," Sensors and Actuators A, 66, 118–124.
Gopel, W., Hesse, J. and Zemel, J. N. (series eds.). Sensors: A Comprehensive Review, in eight
volumes 1989–98, Wiley-VCH, Weinheim.
Greenwood, J. C. (1988). "Silicon in mechanical sensors," J. Phys E.: Sci. Instrum, 21, 1114–1128.
Grieff, P., Boxenhorn, B., King, T. and Niles, L. (1991). Silicon monolithic micromechanical gyro-
scope, Proceedings of Transducers '91, July, San Fransisco, pp. 966-969.
Hanna, S. M. (1987). "Magnetic field sensors based on SAW propagation in magnetic films," IEEE
Trans. UFFC, 34, 191–194.
Hatfield, J. V., Covington, J. A. and Gardner, J. W. (2000). "GasFETs incorporating conducting
polymers as gate materials," Sensors and Actuators B, 65, 253–256.
Hauptmann, P. (1991). Sensors: Principles and Applications, Prentice Hall, New York.
Heilig, A. et al, (1997). "Gas identification by modulating temperatures of tin dioxide based thick-
film gas sensors," Sensors and Actuators B, 43, 45–51.
Ihokura, K. and Watson, J. (1994). The Stannic Oxide Gas Sensor, CRC Press, Florida, p. 245.
Janata, J. (1992). "Microsensors based on modulation of work function," in J. W. Gardner and
P. N. Bartlett, eds., Sensors and Sensory Systems for an Electronic Nose, NATO ASI Series,
212, Kluwer Academic Publishers, Dordrecht, pp. 103–116.
Johnson, R. G. and Higashi, R. E. (1987). "A highly sensitive chip microtransducer for air flow
and differential pressure sensing application," Sensors and Actuators, 11, 63-72.
Koch, H. (1989). In W. Gopel, J. Hesse and J. N. Zemel, eds. SQUID Sensors in Sensors: A
Comprehensive Survey, Vol. 5: Magnetic Sensors, pp. 381-445.
Kung, J. T. and Lee, H. S. (1992). "An integrated air cap capacitor pressure sensor and digital
read-out with sub 100 attofarad resolution," J. Microelectromech Syst., 1, 121–129.
Lee, S. M. et al. (2000). Silicon planar pellistors based on nanoporous films and microhotplates,
Proc. of Euspen Technology Workshop, University of Warwick, UK, September, pp. 18–21.
Llobet, E. (1998). "Selectivity enhancement of metal oxide semiconductor chemical sensors through
the study of their transient response to a step-change in gas concentration," Ph.D. Thesis, Univer-
sity of Barcelona, Spain.
Lundstrom, I. (1981). "Hydrogen sensitive MOS structures," Sensors and Actuators, 1, 403–426.
Lundstrom, I. et al. (1992). "Electronic nose based upon field effect structures," in J. W. Gardner
and P. N. Bartlett, eds., Sensors and Sensory Systems for an Electronic Nose, NATO ASI Series,
212, Kluwer Academic Publishers, Dordrecht, pp. 303-319.
Lutes, O. S., Nussbaum, P. S. and Aadland, O. S. (1980). "Sensitivity limits in SOS magnetodi-
odes," IEEE Trans. Electron Devices, 27, 2156–2157.
Madou, M. J. (1997). Fundamentals of microfabrication, CRC Press, Boca Raton, p. 589.
Madou, M. J. and Morrison, S. R. (1989). Chemical Sensing with Solid-State Devices, Academic
Press, New York, 1-556.
Makinwa, K. A. and Huijsing, J. H. (2000). A wind-sensor interface based on thermal sigma-delta
modulation, Proc. of Eurosensors XIV, Copenhagen, Denmark, August, pp. 27-30.
McNie, et al. (1998). "Design, fabrication and testing of a silicon ring gyroscope," J. Micromech
Microeng., 8, 284-292.