Page 288 - Modern Control of DC-Based Power Systems

Simulation 247

[6] J. Liu, D. Obradovic, A. Monti, Decentralized LQG control with online set-point
adaptation for parallel power converter systems, in 2010 IEEE Energy Conversion
Congress and Exposition (ECCE), pp. 3174, 3179, 12 16 Sept. 2010.
[7] H. El Fadil, F. Giri, M. Haloua, H. Ouadi, Nonlinear and adaptive control of buck
power converters, in Proceedings. 42nd IEEE Conference on Decision and Control,
2003, vol. 5, no., pp. 4475, 4480 Vol. 5, 9 12 Dec. 2003.
[8] M.L. McIntyre, M. Schoen, J. Latham, Simplified adaptive backstepping control of
buck DC:DC converter with unknown load, 2013, in IEEE 14th Workshop on
Control and Modeling for Power Electronics (COMPEL), pp. 1,7, 23 26 June
2013.
[9] F. Barati, L. Dan, R.A. Dougal, Voltage regulation in medium voltage DC systems,
in 2013 IEEE Electric Ship Technologies Symposium (ESTS), pp. 372, 378, 22 24
April 2013.
[10] D. Bosich, M. Gibescu, N. Remijn, I. Fazlagic, J. de Regt, Modeling and
Simulation of an LVDC Shipboard Power System: Voltage Transients Comparison
with a Standard LVAC Solution, in Electrical Systems for Aircraft, Railway and Ship
Propulsion (ESARS), 2015, pp. 1,5, 3 5 Mar. 2015.
[11] M. Kishnani, S. Pareek, R. Gupta, Optimal tuning of DC motor via simulated
annealing, in International Conference on Advances in Engineering and Technology
Research (ICAETR), 2014, pp. 1,5, 1 2 Aug. 2014.
[12] M. Cupelli, L. Zhu, A. Monti, Why ideal constant power loads are not the worst
case condition from a control standpoint, IEEE Trans. Smart Grid 6 (6) (2015)
2596 2606.
[13] H. Xin, Modeling and Control of the Multi-terminal MVDC System, Master Thesis,
Institute for Automation of Complex Power Systems - RWTH Aachen University,
2012.