Page 356 - Plastics Engineering

Processing of Plastics 339

Fig. 4.77 Pultrusion process

already been dealt with in Section 4.3.8. See also the section on Reaction
Injection Moulding (RIM) since this offers the opportunity to incorporate fibres.

Bibliography
Fisher, E.G, Extrusion of Plastics, Newnes-Butterworth, 1976.
Schenkel, G, Plastics Extrusion Technology and Practice, Iliffe, 1966.
Fisher, E.G, Blow Moulding of Plastics, Iliffe, 1971.
Rubin, I, Injection Moulding-Theory and Practice, Wiley, 1972.
Holmes-Walker, W.A. Polymer Conversion, Applied Science Publishers, 1975.
Bown, J, Injection Moulding of Plastic Covonents, McGraw-Hill, 1979.
Dym, J.B, Injecrion Moulds and Moulding, Van Nostrand Rheinhold, 1979.
Pye, R.G.W, Injection Mould Design, George Godwin, 1978.
Elden, R.A. and Swann, A.D, Calendering ofPlastics, Plastics Institute Monograph, Iliffe, 1971.
Rosenzweig, N., Marks, M., and Tadmar, Z., Wall Thickness Distribution in Thennoforming
Polym. Eng. Sci. October 1979 Vol 19 No. 13 pp 946-950.
Parker, F.J, The Status of Thermoset Injection Moulding Today, Progress in Rubber and Plastic
Technology. October 1985, vol 1, No 4, pp 22-59.
Whelm, A and Brydson, J.A. Developments with Thennosetting Phtics App. Sci. Pub. London
1975.
Monk, J.F. Thennosetting Plastics - Practical Moulding Technology, George Godwin, London
1981.
Rosato, D.V. ed. Rosato. D.V. (ed.) Blow Moulding Handbook, Hanser, Munich (1989).
Hepbum, C. Polyurethane Elastomers (ch 6-RIM) Applied Science Publishers, London (1982).
Martin, J., Pultrusion Ch 3 in ‘Plastics Product Design Handbook - B’ ed by E. Miller, Dekker
Inc, New York (1983).
Titow, W.V. and Lanham, B.J, Reinforced Thermoplastics, Applied Science Publisher, 1975.
Penn, W.S. GRP Technology, Maclaren, 1966.
Beck, R.D, Plastic Product Design, Van Nostrand Reinhold Co. 1980.
Schwa, S.S. and Goodman, S.H. Plastic Marerials and Processes, Van Nostrand, New York,
1982.
Crawford, R.J. Rotational Moulding of Plastics, Research Studies Press 2nd edition (1996).