Page 220 - Principles of Applied Reservoir Simulation 2E

Part HI: Case Study 205

from 6000 psig to 0 psig. The separator test conditions and results are presented
in Table 20-7b.
Table 20-7b
Separator Test (Flash)

Sep.P GOR FVF
(psig) (SCF/STB) (RB/STB)
100 572

I
0 78
Total GOR = 650 1.5

The values needed to perform the differential to flash conversion are the
following:

1.50 RB/STB 760 SCF/STB
B
ojbp R-sodbp
1.63 RB/STB 650 SCF/STB
"odbp ™sojbp
The corresponding correction factors are
x
B (D) = B J(D) x —'-— = B ,(D) 0.92
0W odW} j ^ 0W
R so(p) = 650 - [760 - R sod(p)} x 0.92
Applying these corrections to the differential data yields the corrected results
shown in Table 20-7c.

Table 20-7c
Corrected Oil-Phase Properties

Pressure Oil FVF OURso
(psia) (RB/STB) (SCF/STB)
14.7 1.062 1
514.7 1.110 89
1014.7 1.191 208
1514.7 1.256 310

2014.7 1.320 392
2514.7 1.380 457