Page 219 - Renewable Energy Devices and System with Simulations in MATLAB and ANSYS

206 Renewable Energy Devices and Systems with Simulations in MATLAB and ANSYS ®
®

51. M. S. El-Moursi, B. Bak-Jensen, and M. H. Abdel-Rahman, Novel STATCOM controller for mitigating
SSR and damping power system oscillations in a series compensated wind park, IEEE Transactions on
Power Electronics, 25(2), 429–441, February 2010.
52. K. Ma, W. Chen, M. Liserre, and F. Blaabjerg, Power controllability of three-phase converter with unbal-
anced AC source, IEEE Transactions on Power Electronics, 30(3), 1591–1604, March 2014.
53. K. Ma, F. Blaabjerg, and M. Liserre, Operation and thermal loading of three-level neutral-point-clamped
wind power converter under various grid faults, IEEE Transactions on Industry Applications, 50(1),
520–530, 2014.
54. B. Engel, M. Victor, G. Bachmann, and A. Falk, 15 kV/16.7 Hz energy supply system with medium
frequency transformer and 6.5 kV IGBTs in resonant operation, in Proceedings of EPE’2003, pp. 1–10,
Toulouse, France, September 2–4, 2003.
55. S. Inoue and H. Akagi, A bidirectional isolated DC–DC converter as a core circuit of the next-generation
medium-voltage power conversion system, IEEE Transactions on Power Electronics, 22(2), 535–542,
2007.
56. F. Iov, F. Blaabjerg, J. Clare, O. Wheeler, A. Rufer, and A. Hyde, UNIFLEX-PM-A key-enabling technol-
ogy for future european electricity networks, EPE Journal, 19(4), 6–16, 2009.
57. M. Davies, M. Dommaschk, and J. Dorn, J. Lang, D. Retzmann, and D. Soerangr, HVDC PLUS: Basics
and principles of operation, Siemens Technical articles, 2008.
58. A. Lesnicar and R. Marquardt, An innovative modular multilevel converter topology suitable for a wide
power range, in Proceedings of IEEE Bologna PowerTech Conference, pp. 1–6, 2003.
59. K. Ma and F. Blaabjerg, The impact of power switching devices on the thermal performance of a 10 MW
wind power NPC converter, Energies, 5(7), 2559–2577.
60. R. Jakob, C. Keller, and B. Gollentz, 3-Level high power converter with press pack IGBT, in Proceedings
of EPE’ 2007, pp. 2–5, September 2007.
61. R. Alvarez, F. Filsecker, and S. Bernet, Comparison of press-pack IGBT at hard switching and clamp
operation for medium voltage converters, in Proceedings of EPE’2011, pp. 1–10, 2011.
62. U. Scheuermann, Reliability challenges of automotive power electronics, Microelectronics Reliability,
49(9–11), 1319–1325, 2009.
63. U. Scheuermann and Ralf Schmidt, A new lifetime model for advanced power modules with sintered
chips and optimized al wire bonds, in Proceedings of PCIM’ 2013, pp. 810–813, 2013.
64. A. Prasai, Y. Jung-Sik, D. Divan, A. Bendre, and S.-K. Sul, A new architecture for offshore wind farms,
IEEE Transactions on Power Electronics, 23(3), 1198–1204, May 2008.
65. F. Iov, P. Soerensen, A. Hansen, and F. Blaabjerg, Modelling, analysis and control of DC-connected wind
farms to grid, International Review of Electrical Engineering, Praise Worthy Prize, 10, February 2006.
66. S. Engel, N. Soltau, H. Stagge, and R. W. De Doncker Dynamic and balanced control of three-phase
high-power dual-active bridge DC-DC converters in DC-grid applications, IEEE Transactions on Power
Electronics, 28(4), 1880–1889, 2012.
67. C. Meyer, M. Hoing, A. Peterson, and R. De Doncker, Control and design of dc grids for offshore wind
farms, IEEE Transactions of Industrial Applications, 43(6), 1475–1482, November/December 2007.
68. R. B. Gimenez, S. A. Billalba, J. R. Derlee, F. Morant, and S. B. Perez, Distributed voltage and frequency
control of offshore wind farms connected with a diode-based HVdc link, IEEE Transactions on Power
Electronics, 25(12), 3095–3105, 2010.
69. P. Menke, R. Zurowski, T. Christ, S. Seman, G. Giering, T. H. Mer, W. Zink et al., Latest DC grid access
using diode rectifier units (DRU), Siemens AG, Wind Integration Workshop, Brussel, Belgium, October
2015.
70. D. Zhou, F. Blaabjerg, T. Franke, M. Tonnes, and L. Mogens, Reduced cost of reactive power in doubly
fed induction generator wind turbine system with optimized grid filter, in Proceedings of IEEE ECCE
2014, pp. 1490–1499, 2014.
71. J. G. Slootweg, H. Polinder, and W. L. Kling, Dynamic modelling of a wind turbine with doubly fed
induction generator, 2001 Power Engineering Society Summer Meeting Conference Proceeding (Cat. No.
01CH37262), vol. 1, pp. 644–649, 2001.
72. R. Pena, J. C. Clare, and G. M. Asher, Doubly fed induction generator using back-to-back PWM con-
verters and its application to variable-speed wind-energy generation, IEE Proceedings: Electric Power
Applications, 143(3), 231, 1996.
73. Y. Errami, M. Maaroufi, and M. Ouassaid, Modelling and control strategy of PMSG based variable speed
wind energy conversion system, 2011 International Conference on Multimedia Computing and Systems
(ICMCS), vol. 2, pp. 1–6, 2011.
74. P. Kundur, Power Systems Stability and Control, 1st edn., McGraw-Hill Education, New York, 1994.