Page 77 - Semiconductor Manufacturing Handbook

Geng(SMH)_CH06.qxd 04/04/2005 19:37 Page 6.16

PLASMA PROCESS CONTROL

6.16 SEMICONDUCTOR FUNDAMENTALS AND BASIC MATERIALS

REFERENCES

1. Hittorf, W., “Wiedemannus Ann Physics,” Vol. 21, pp. 90–139, 1884.
2. MacKinnon, K. A., The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science,
Vol. 8, pp. 605–616, 1929.
3. Gudmundsson, J. T., and M. A. Lieberman, “Magnetic induction and plasma impedance in a cylindrical
inductive discharge,” Plasma Sources Science Technology, Vol. 6, pp. 540–550, 1997.
4. Thomson, J. J., Philosophical Magazine, Vol. 32, pp. 321–336, 1891.
5. Thomson, J. J., Philosophical Magazine, Vol. 32, pp. 445–464, 1891.
6. Tykocinski-Tykociner, J., Philosophical Magazine, Vol. 13, pp. 953–963, 1932.
7. Piejak, R. B., V. A. Godyak, and B. M. Alexandrovich, “A simple analysis of an inductive RF discharge,”
Plasma Sources Science Technology, Vol. 1, pp. 179–186, 1992.
8. Keller, J. H., “Inductive plasmas for plasma processing,” Plasma Sources Science Technology, Vol. 5,
pp. 166–172, 1996.
9. Keller, J. H., J. C. Forster, and M. S. Barnes, “Novel radio-frequency induction plasma processing tech-
niques,” Journal Vacuum Science Technology A, Vol. 11, No. 5, pp. 2487–2491, 1993.
10. El-Fayoumi, I. M., and I. R. Jones, “The electromagnetic basis of the transformer model for an inductively
coupled RF plasma source,” Plasma Sources Science Technology, Vol. 7, pp. 179–185, 1998.
11. Colpo, P., R. Ernst, and F. Rossi, “Determination of the equivalent circuit of inductively coupled plasma
sources,” Journal of Applied Physics, Vol. 85, No. 3, pp. 1366–1371, 1999.
12. Godyak, V. A., R. B. Piejak, and B. M. Alexandrovich, “Electrical characteristics and electron heating mech-
anism of an inductively coupled argon discharge,” Plasma Sources Science Technology, Vol. 3, pp. 169–176,
1994.
13. Turner, M. M., and M. A. Lieberman, “Hysteresis and the E to H transition in radio frequency inductive dis-
charge,” Plasma Sources Science Technology, Vol. 8, pp. 313–324, 1999.
14. Piejak, R. B., V. A. Godyak, and B. M. Alexandrovich, “The electric field and current density in a low pres-
sure inductive discharge measure with different B-dot probes,” Journal of Applied Physics, Vol. 81, No. 8,
pp. 3416–3421, 1997.
15. El-Fayoumi, I. M., and I. R. Jones, “Measurement of the induced plasma current in a planar coil, low fre-
quency, RF induction plasma source,” Plasma Sources Science Technology, Vol. 6, pp. 201–211, 1997.
16. Holber, W. M., Handbook of Ion Beam Technology: Principles, Deposition, Film Modification and Synthesis,
Park Ridge, NJ: Noyes, 1989, p. 21.
17. Lieberman, M. A., and A. J. Lichtenberg, Principles of Plasma Discharges and Materials Processing, New
York: Wiley, 1994.
18. Hargis, Jr., P. J., et al., “The gaseous electronics conference radio frequency reference cell: A defined paral-
lel plate radio system for experimental and theoretical studies of plasma processing,” “The Review of
Scientific Instruments,” Vol. 65, No. 1, pp. 140–154, 1994.
19. Sobolewski, M. A., “Current and voltage measurements in the gaseous electronics conference RF reference
cell,” Journal of Research of the National Institute of Standards and Technology, Vol. 100, No. 4, pp. 341–351,
1995.
20. Bobbio, S. M., “A review of magnetron etch technology,” Proceedings of SPIE Int. Society of Optical
Engineering, Vol. 1185, pp. 262–277, 1989.
21. Arami, J., et al., Plasma Process Device, US Patent 6014943, 2000.
22. Shan, H., et al., Magnetically Enhanced Plasma Chamber with Non-uniform Magnetic Field, US Patent
6113731, 2000.
23. Wang W. D., et al., Auxiliary Electromagnets in a Magnetron Sputter Reactor, US Patent 6730196, 2004.
24. Subramani, A., et al., Magnetron with a Rotating Center Magnet for a Vault Shaped Sputtering Target, US
Patent 6406599, 2002.
25. Wang, W. D., Coaxial Electromagnet in a Magnetron Sputtering Reactor, US Patent 6352629, 2002.
26. Ding, P., Magnet Array in Conjunction with Rotating Magnetron for Plasma Sputtering, US Patent 6610184,
2003.

Downloaded from Digital Engineering Library @ McGraw-Hill (www.digitalengineeringlibrary.com)
Copyright © 2004 The McGraw-Hill Companies. All rights reserved.
Any use is subject to the Terms of Use as given at the website.