Page 63 - The Ultimate Palm Robot

Color profile: Generic CMYK printer profile
Composite Default screen
Bots / The Ultimate Palm Robot/ Mukhar & Johnson / 222880-6 / Chapter 3

46 The Ultimate Palm Robot

Your kit should have another red wire with a crimp on one end, and ex-
posed wire at the other end. Solder the exposed wire to one of the outer termi-
nals of the switch—it doesn’t matter which.

The black wire from the battery pack, like the red wire from the previous
step, has a crimp on the end. These crimps are inserted into the red connector
housing. The connector housing fits onto the power pins on the SV203 con-
troller, and it only fits in a particular orientation. With the housing oriented to
match the board, insert the red crimp into the side of the housing that will fit
into the + pin of the controller. Insert the black crimp into the other side.

P:\010Comp\Bots\880-6\ch03.vp
Monday, May 12, 2003 4:40:26 PM