Page 89 - Urban Construction Project Management

the pipe to determine and chemical composition, Start the fire pump and determine the It the standpipe. needs to meet fire department standards. Load test must be done to ensure that all Elevators must be tested to make sure that they will automatically slow down Proper clearances must be left below the in order for there to be enough room for the elevator buffers, a all elevator
water cannot go back into the supply
Check the valves to make sure that

Take samples of its thickness, general condition. Check the pressure to make sure it meets fire department standards. pressure at the top of safety features are functioning. Brakes must be able to stop the car under a full load. once a certain speed is reached. in the pit, which stop the car in the event of Firefighter-only key switch must be installed in all elevators. Under a fire alarm condition, cars must go to the lobby.

system. car, failure.

Back flow preventors Coupon Fire hydrant Manifold standpipe pump test 9. Elevators Load Braking Acceleration Clearances Firefighter key switch Elevator recall Exhibit 3-3 (Continued)

53