Page 201 - Water Engineering Hydraulics, Distribution and Treatment

179
References
Fair, G. M., Geyer, J. C., and Okun, D. A., Elements of Water Supply
and Wastewater Disposal, John Wiley & Sons, Inc., New York,
1951.
1971.
Roberson, J. A., Cassidy, J. J., and Chaudhry, M. H., Hydraulic
Flynn, P. J., Flow of Water in Open Channels, Pipes, Sewers, Con-
Engineering, 2nd ed., John Wiley & Sons, Inc., New York,
1998.
duits, Etc., Kessinger Publishing, Whitefish, MT, 2007.
Rouse, H., Engineering Hydraulics, John Wiley & Sons, Inc., New
Gile, R., Evett, J., and Liu, C., Fluid Mechanics and Hydraulics,
3rd ed., McGraw-Hill Publishing, New York, 1994.
York, 1950.
Haestad Methods Water Solutions, Computer Applications in
Shammas, N. K. and Al-Dhowalia, K., Effect of pressure on leakage
rate in water distribution networks, Journal of Engineering
Hydraulic Engineering, 7th ed., Bentley Institute Press, Exton,
Sciences, vol. 5, no. 2, pp. 155–312, 1993.
PA, 2007.
Mays,L.W.(editor), Hydraulic Design Handbook, McGraw-Hill,
Shammas, N. K. and Wang, L. K., Water Supply and Wastewater
Removal, 3rd ed., John Wiley & Sons, Inc., New York, 824 pp,
New York, 1999. Rich, G. R., Hydraulic Transients, McGraw-Hill, New York,
Mays,L.W., Water Resources Engineering, 2nd ed., John Wiley & 2011.
Sons, Inc., New York, 2011. Shannon, W. L., Prediction of frost penetration, Journal of
Munson, B. R., Young, D. F., and Okiishi, T. H., Fundamentals of New England Water Works Association, vol. 59, p. 356,
Fluid Mechanics, 3rd ed., John Wiley & Sons, Inc., New York, 1945.
1998. Sharma, A. K. and Swamee, P. K., Design of Water Supply Pipe
Newnan, D. G., Engineer-In-Training License Review, 15th ed., Networks, John Wiley & Sons, Inc., New York, February
Engineering Press, San Jose, CA, 1998. 2008.
Newnan, D. G., Civil Engineering: License Review, Engineering Swindin, N., The Flow of Liquids in Pipes, Kessinger Publishing,
Press, San Jose, CA, 2004. Whitefish, MT, 2007.
Parmakian, J., Air inlet valves for steel pipe lines, Transaction of the Tullis, J. P., Hydraulics of Pipelines: Pumps, Valves, Cavitation,
American Society of Civil Engineers, vol. 115, no. 1, pp. 438– Transients, John Wiley & Sons, Inc., New York, 1989; online
443, 1950. publication December 12, 2007.
Prior, J. C., Investigation of bell-and-spigot joints in cast-iron water Wang, L.K. and Wang, M.H.S., Standard and Guides of Water
pipes, Part I: Pullout strength; Part II: Bell strength; Part III: Treatment and Water Distribution Systems, US Dept. of Com-
Harness strength, Ohio State University Engineering Experi- merce, National Technical Information Service, Springfield,
ment Station Bulletin, vol. 87, 1935. VA, PB88-177902, 345 pp, 1988.
Qasim, S. R., Motley, E. M., and Zhu, G., Water Works Engineer- Williams, S. and Hazen, A., Hydraulic Tables, 3rd ed., John Wiley
ing – Planning, Design and Operation, Prentice Hall, Upper & Sons, Inc., New York, 1933.
Saddle River, NJ, 2000.