Page 151 - Wire Bonding in Microelectronics

W ir e Bond Testing 129

4-49 Horsting, C. W., “Purple Plague and Gold Purity,” 10th Annual Proc. IEEE
Reliability Physics Symposium, Las Vegas, Nevada, Apr. 5–7, 1972, pp. 155–158.
4-50 Ebel, G. H.,” Failure Analysis Techniques Applied in Resolving Hybrid
Microcircuit Reliability Problems,” 15th Annual Proceedings Reliability Physics,
Las Vegas, Nevada, Apr. 12–14, 1977, pp. 70–81.
4-51 Polcari, S. M. and Bowe, J. J., “Evaluation of Non-Destructive Tensile Testing,”
Report No. DOT-TSC-NASA-71-10, June 1971, pp. 1–46.
4-52 Ang, C. Y., Eisenberg, P. H., and Mattraw, H. C., “Physics of Control of Electronic
Devices,” Proc. 1969 Annual Symposium on Reliability, Chicago, Illinois, Jan. 1969,
pp. 73–85.
4-53 Slemmons, J. W., “The Microworld of Joining Technology,” The American Welding
Society 50th Annual Meeting, Proceedings, Philadelphia, Pennsylvania, Apr. 1969,
pp. 1–48.
4-54 Bertin, A. P., “Development of Microcircuit Bond-Pull Screening Techniques,”
Final Technical Report RADC-TR-73-123, Apr. 1973, AD762–333.
4-55 MIL-STD-883G/H, 28 February 2006 and Initial Draft of MIL-STD-883, Revision
H,, November 2008; Test Methods and Procedures for Microelectronics, and
MIL-PRF-38534F, 2006.
4-56 Harman, G. G., “A Metallurgical Basis for the Non-Destructive Wire-Bond Pull-
Test,” 12th Annual Proc. IEEE Reliability Physics, Las Vegas, Nevada, Apr. 2–4,
1974, pp. 205–210.
4-57 Roddy, J., Spann, N., and Seese, P., IEEE Trans. on Components, Hybrids, and
Manufacturing Technology, Vol. 1, Sept. 1978, pp. 228–236.
4-58 Blazek, R. S., “Development of Nondestructive Pull Test Requirements for Gold
Wires on Multilayer Thick Film Hybrid Microcircuits,” IEEE Trans. on Components,
Hybrids, and Manufacturing Technology, Vol. 6, Dec. 1983, pp. 503–509.