Page 82 - Amphibionics : Build Your Own Biologically Inspired Robot
P. 82
Amphibionics 04 3/24/03 8:23 AM Page 61
Chapter 4 / Frogbotic: Build Your Own Robotic Frog
6. Use a soldering iron to de-solder the three wires that are
attached to its leads, as shown in Figure 4.12. Take note of
which wire is attached to the center terminal. Either mark the
wire or write down the color, as this wire must be connected
to the middle lead of the resistor network that will be fabri-
cated in the next step.
FIGURE 4.12
Potentiometer with
wires attached.
61
