Page 83 - Amphibionics : Build Your Own Biologically Inspired Robot
P. 83
Amphibionics 04 3/24/03 8:23 AM Page 62
Amphibionics
7. For this step, you will need two 1/4-watt, 2.4 K resistors to
create a resistor network that will replace the potentiometer
that was just removed. Try to select two resistors that have
very close resistance values, although it is not extremely
important, since any discrepancies can be compensated for
in the control software. Cut the resistor leads to a length of
3/8-inch. Twist two of the ends together and solder, as
shown in Figure 4.13.
FIGURE 4.13
Resistor network.
62
