Page 340 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Fundamentals of Drawing Engineering Design with SOLIDWORKS® 2018

Edit the DWG NO.

Formatting
376) Double-click the GUIDE text in the DWG NO. box.

The Formatting and Note PropertyManager is I Century Gothic v J 24 v J 6.35mm j A B

SIZE DWG~=:=;::::;;;~ REV
displayed.
B A

377) Delete GUIDE. Note: The Formatting dialog is still SCALE: 1 :1 WEIGHT: SHEET 1 OF 1

active.

Formatting

378) Click the Link to Property ~ icon in the J Century Gothic v j 24 v, 6.35mm IA

SIZE DWG. NO. REV
Properties dialog box. •
B A

379) Select Number from the Link to Property SCALE: 1 :1 WEIGH f':"J SHEET 1 OF 1

drop-down menu.

Link to property x
380) Click OK from the Link to Property box. The

Use custom properties from
number is displayed in the DWG. NO. box.

@current document

O Model found here

381) Click OK ~ from the Note PropertyManager. Current Document v

Selection:
382) Right-click Edit Sheet.

GUIDE File Properties

Property name:
Fit the drawing to the Graphics window.

383) Press the f key. The drawing remains in the

Edit Sheet Format mode. Evaluated value:

56-22222

Save the Drawing. Date format: Long Short Show Time

384) Click Save Ii.

Note: Remain in the Edit Sheet Format mode OK I Cancel Help

through the next few steps. The Title block

information is displayed in blue.
D&M ENGINEERING

Define Custom Properties for Material and Surface TITLE:

Finish in the GUIDE part. Return to the GUIDE GUIDE SUPPORT

drawing to complete the Title block. The design team

decided that the GUIDE part would be fabricated from

SIZE DWG. NO. REV

304 Stainless Steel. There are numerous types of B 56-22222 A

Stainless steels for various applications. Select the

SCALE: 1: 1 WEIGHT: SHEET 1 OF 1
correct material for the application. This is critical!

AISI 304 was set in the part. Open the GUIDE part

and create the Material Custom Property. The AISI

304 value propagates to the drawing. Surface Finish is another important property in

machining. The GUIDE utilizes an all around 0.80µm high grade machined finish. The

numerical value refers to the roughness height of the machined material. Surface finish

adds cost and time to the part. Work with the manufacturer to specify the correct part

finish for your application.

PAGE4 - 64