Page 335 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS
P. 335
Engineering Design with SOLIDWORKS® 2018 Fundamentals of Drawing
An Engineering Change Order (ECO) or Engineering Change Notice (ECN) is written for
each modification in the drawing. Modifications to the drawing are listed in the Revision
Table.
, ,/
-;(J~ Obtain the ECO number before you institute the change to manufacturing.
Revision Table
The Revision Table provides a drawing history. Changes to the document are recorded
systematically in the Revision Table. Insert a Revision Table into the GUIDE drawing.
The default columns are as follows: Zone, Rev, Description, Date and Approved.
Zone utilizes the row letter and column number contained in the drawing border.
Position the Rev letter in the Zone area. Enter the Zone letter/number.
Enter a Description that corresponds to the ECO number. Modify the date if required.
Enter the initials/name of the engineering manager who approved the revision.
I Activity: Revision Table
Insert a Revision table.
351) Click None from the Layer drop-down menu.
: Change document layer.
352) Click the Revision Table tool from the Consolidated toolbar in the Notes v ~
-Per Standard-
CommandManager. The Revision Table PropertyManager is displayed. REV
Accept the defaults. 1 O F 1
Dim
Notes
Hidden Dims
353) Click OK ~ from the Revision Table PropertyManager.
The Revision table is displayed in the top right corner of ~
the Sheet. Tables ~ Revision Table <:!)
354) Zoom in on the first row in the table. IE eneral Table Message
Selen op1ions and then click OK to
place Revision Table into the drawing.
~ Hole Table
Table Template
~ Bill of Materials
standard revision block ~
~ Revision Table
Table Position
'I,, Weld Table
O Attach to anchor point
~ Bend Table Revision Symbol
Shapes
Punch Table
-o 0[g]~
System Options
(;21 Enable symbol when adding
new revision
Options
(;21 Auto Update Zone Cells
Border
!v'! Use document settings
D
+ v
Layer
~
~ lNotes v
PAGE4 - 59
