Page 396 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Extrude and Revolve Features Engineering Design with SOLIDWORKS® 2018

130) Release the Ctrl key. The second circle is selected. If ,---[ 12.70]

0 .500
needed click OK ~ from the Circle PropertyManager.

Add an Equal relation.

131) Hold the Ctrl key down.

132) Click the circumference of the first circle. The

Properties PropertyManager is displayed. Both circles are

selected and are displayed in green.

133) Release the Ctrl key.

134) Right-click Make Equal from the Context toolbar.

135) Click OK ~ from the Properties

,---[ 12.70]
PropertyManager. The second circle remains 0 .500

selected.

Add an aligned dimension.

D
136) Click the Smart Dimension (' Sketch tool.

137) Click the two center points of the two circles.

138) Click a position off the profile in the upper left

corner.

139) Enter 1.000in, [25.4] for the aligned dimension.

140) Click the Green Check mark ~ in the

Modify dialog box.

~ [12.70]

0 .500

Insert a centerline.

#p
141) Click the Centerline r1# Sketch tool. The

Insert Line PropertyManager is displayed.

142) Sketch a centerline between the two [25.40] -----...
1.000
circle center points as illustrated.

143) Right-click Select to end the line.

, 1 /

;Q~ Double-click to end the centerline.

~[12.70]

<l>.500

[25.40] -----...

1.000

PAGE 5 - 28