Page 394 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Extrude and Revolve Features Engineering Design with SOLIDWORKS® 2018

View the mouse pointer for feedback to select Edges or Faces for the fillet.

, 1 /

-;Q~ Do not select a fillet radius which is larger than the surrounding geometry.

Example: The top edge face width is .150in, [3.81]. The fillet is created on both sides of

the face. A common error is to enter a Fillet too large for the existing geometry. A

minimum face width of .200in, [5.08] is required for a fillet radius of . lOOin, [2.54].

The following error occurs when the fillet radius is too large for the existing geometry.

- D x
l:9 What's Wrong

Type Feature Previe Hel Description

~ Error (tjTop ® Failed to create fillet. Please checkthe input geometry and radius values or try using the "Face fillet" option.
Pace

Fillet

* Select FeatureXpert to attempt repair of the highlighted error(s). ·:
,..

Iv! Show errors Iv! Show warnings E2] Display What's Wrong during rebuild FeatureXpert Close Help

Avoid the fillet rebuild error. Use the FeatureXpert to FeatureXpert has resolved 0% of broken features.

address a constant radius fillet build error or manually

enter a smaller fillet radius size.

[ Cancel ]

BATTERY Part - Extruded Boss/Base Feature

The Extruded Boss feature requires a truncated cone shape to represent the geometry of

the BATTERY terminals. The Draft Angle option creates the tapered shape.

Sketch the first circle on the Top face. Utilize the Ctrl key to copy the first circle.

The dimension between the center points is critical. Dimension the distance between the

two center points with an aligned dimension. The dimension text toggles between linear

and aligned. An aligned dimension is created when the dimension is positioned between

the two circles.

An angular dimension is required between the Right Plane and the centerline. Acute

angles are less than 90°. Acute angles are the preferred dimension standard. The overall

BATTERY height is a critical dimension. The BATTERY height is 4.500in, [114.3].

PAGE5 - 26