Page 82 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS

Fundamentals of Part Modeling Engineering Design with SOLIDWORKS® 2018

Part Document Template and

File name: I •.
Document Properties ~ =====---~~~~-==I

Save as type: I Part Templates (*.prtdot)

Description: Add a description
The Part template is the foundation for a

SOLIDWORKS part. Partl displayed in the @Save as Include all referenced c

FeatureManager utilizes the Part #.PRTDOT O Save as copy and continue J Add prefix l

O Save as copy and open J Add suffix
default template. .. Hide Folders

Document Properties contain the default settings

for the Part template. The Document Properties include the drafting/dimensioning

standard, units, dimension decimal display, grids, note font and line styles.

There are hundreds of document properties. Modify the following Document Properties:

Drafting standard, Units and Decimal Places.

The Drafting standard determines the display of dimension text, arrows, symbols and

spacing. Units are the measurement of physical quantities. Millimeter (MMGS)

dimensioning and decimal inch (IPS) dimensioning are the two most common unit types

specified for engineering parts and drawings.

Document Properties are stored with the document. Apply the Document Properties to

the Part template.

Create a Part template named PART-MM-ANSI from the default Part template. Save the

Custom Part template in the ENGDESIGN-W-SOLIDWORKS\MY-TEMPLATES

folder. Utilize the PART-MM-ANSI Part template for all metric parts.

, 1 /

-;Q~ Conserve modeling time. Set the Document Properties and create the required

templates before starting a project.

The Overall Drafting standard options are ANSI, ISO, DIN, JIS, BSI, GOST and GB.

Overall Abbreviation: Description:

Drafting

standard

o tions:

. ~ ANSI American National Standards Institute

ANSI

ISO International Standards Or anization
ISO

DIN DIN Deutsche Institute fur Normum German

JIS JIS

851 BSI British Standards Institution

GOST
GOST Gosndarstuenn e State Standard Russian

GB
GB Guo Biao Chinese

Display the parts, assemblies and drawings created in the GUIDE-ROD assembly in the

ANSI drafting standard.

PAGE2 - 10