Page 205 - Finite Element Analysis with ANSYS Workbench

196 Chapter 10 Thermal Stress Analysis

(d) Applying Boundary Conditions, Solving for and Display-
ing Solutions

 Next, the boundary conditions of specified temperatures
along the top and bottom edges can be applied. This will be
done, one at a time, starting from the bottom edge.
 On the main Project Schematic window, double click on
Setup. Select Analysis Settings under Steady-State
Thermal. Select the Temperature tab on the upper menu
bar, then select Edge icon (box with arrow and green edge).
Move the cursor to the bottom edge and click at it, the
bottom edge will become green. Click Apply button next
to the Geometry button under the Details of Temperature
window, and change temperature value next to the
Magnitude button to 245, and hit Enter.

 Repeat the same process to apply boundary condition along
the top edge. This is done by first selecting the Analysis