Page 330 - Hacking Roomba
P. 330
Chapter 14 — Putting Linux on Roomba 311
One of the nice things about OpenWrt compared to vendor-supplied is that you can stack up
changes to be made and then apply them all at once. Another nice thing is that applying changes
doesn’t require a reboot.
FIGURE 14-6: Changing the IP address in OpenWrt
4. Disable the WAN port.
■ Select the WAN sub-category as shown in Figure 14-7.
■ The WL-HDD only has one Ethernet port, so the distinction between LAN and
WAN is a bit meaningless here. To avoid confusion just disable it entirely.
■ Click Save Changes when done.
