Page 332 - Hacking Roomba

Chapter 14 — Putting Linux on Roomba 313

FIGURE 14-8: Configuring OpenWrt as a wireless client

6. Apply changes.
■ At this point you have all the changes queued up and you can review them with
Review Changes.
■ Or, just press Apply Changes and you’ll see OpenWrt reconfiguring itself.

Then, because you changed its IP address, you won’t be able to contact it. It will have
joined your wireless network, so you can connect to it wirelessly now.
7. Change your PC’s network configuration to be back on your wireless net. Use your
browser to go to the new IP address of the WL-HDD. You should again see your
router’s home status page like in Figure 14-4.

The WL-HDD is now fully configured network-wise and it’s time for some fun.