Page 411 - Handbook of Materials Failure Analysis

References 409

[16] El Koussy MR, Mahallawi IS, El Khalifa W, Al Dawood MM, Bueckins M. Effects of
thermal aging on microstructure and mechanical properties of duplex stainless steel
weldments. Mater Sci Technol 2004;20:375–81.
[17] James L. The procedure handbook of arc welding. 14th ed. Cleveland, OH: The James
Lincoln Arc Welding Foundation; 2000.
[18] Das AK. Metallurgy of failure analysis. New York: McGraw- Hill; 1996.
[19] Kou S. Welding metallurgy. 3rd ed. New York: Wiley; 2003.
[20] Abd El-Rahman Abd El-Salam M. Influence of heat input and post-weld heat treatment
on microstructure and mechanical properties of power boiler steel P91 (9Cr-1Mo-V-Nb)
weld joints. PhD Thesis, Faculty of Engineering Cairo University, Feb 2013.
[21] Blume R, Leich KE, Heuser H, Meyer FW. Welding of modified 9%Cr steelT91/P91
with optimised filler metals and welding parameters. Stainless Steel Europe, April
1995:49–53.
[22] Dittrich S, Gross V, Heuser H. In: Proc. nat. welding seminar, Jamshedpur, 1994; 1994.
[23] Abd El-Rahman M, El-Salam A, El-Mahallawi I, El-Koussy MR. Influence of heat input
and post-weld heat treatment on boiler steel P91 (9Cr–1Mo–V–Nb) weld joints Part 1—
microstructure. Int Heat Treat Surf Eng 2013;7(1):23–31.
[24] Abd El-Rahman MAE-S, El-Mahallawi I, El-Koussy MR. Influence of heat input and
post-weld heat treatment on boiler steel P91 (9Cr–1Mo–V–Nb) weld joints Part 2 –
mechanical properties. Int Heat Treat Surf Eng 2013;7(1):32–7.
[25] Srinivasan R, Neeraj T. Hydrogen embrittlement of ferritic steels: deformation
and failure mechanisms and challenges in the oil and gas industry. JOM 2014;66
(8):1377–82.
[26] Malik AU, Ahmed S, Andijani I. Investigations on the failure of steel weldments in sea-
water desalination plants, In: Proc. symposium jointly sponsored by King Saud Univer-
sity and SWCC on desalination process in Saudi Arabia, June 4–6, Riyadh, 1994; 1994.
p. 1024–39.
[27] Pinnow KE, Moskowitz A. Corrosion resistance of stainless steel weldments. East Euro-
pean Welding Research, Welding Research Supplement 1970;278–84.
[28] Liljas M, Ericsson C. Fatigue behaviour of stainless steel welds. Avesta Polarit Corr
Manag Appl Eng 2002;1–2:2–24.
[29] Psyllaki PP, Pantazopoulos G, Pistoli A. Degradation of stainless steel grids in chemi-
cally aggressive environment. Eng Fail Anal 2013;35:418–26.
[30] Saad Abou-elazm A, El Mahallawi I, Abdel-karim R, Rashad R. Failure investigation of
secondary super-heater tubes in a power boiler. Eng Fail Anal 2009;16:433–48.
[31] Shaikh H, Subba Rao RV, George RP, Anita H, Khatak S. Corrosion failures of AISI type
304 stainless steel in a fertiliser plant. Eng Fail Anal 2003;10:329–39.
[32] Li Y, Na X, Xiaofeng W, Shi J, Zhang L, Zhao M, et al. Failure analysis of the 304 stain-
less steel tube in a gas analyzer. Eng Fail Anal 2012;20:35–42.
[33] Korb LJ, Rockwell International, Olson DL. Colorado School of Mines. Corrosion. ASM
handbook, vol. 13. Materials Park, OH: ASM International; 1987, ISBN 0-87170-007-7.
[34] El-Koussy MR, Abd El Masih MN. A Technical report on failure investigations of
BAPETCO well flow line defects Cairo University, December 2008.
[35] El-Koussy MR, Abd El Masih MN. Report on the failure of stainless steel tubes of reboi-
lers No E-2623 & E-2613 in Obaiyed Gas Plant Cairo University, Feb. 2008.
[36] Becker WT, Shipley RJ. ASM handbook, Failure analysis and prevention, vol. 11.
Materials Park, OH: ASM International; 2002. ISBN 0-87170-704-7.