Page 412 - Handbook of Materials Failure Analysis

410 CHAPTER 15 Welding-associated failures in power boilers

[37] El-Koussy MR, Abdelrahman MS.: Failure of super austenitic fire fighting pipe line for
Petrojet, Technical Report by the Mechanical Testing Laboratory, Faculty of Engineer-
ing, Cairo University, Dec. 2011.
[38] Davis JR, editor. Corrosion of weldments. Materials Park, OH: ASM International; 2006.
p. 43–75, Chapter 3.
[39] Brooks JA, Lippold JC. Austenitic stainless steels. In: ASM handbook. 10th ed. Welding,
brazing, and soldering, vol. 6. Materials Park, OH: ASM International; 1993.
p. 1170–205.
[40] Abdelrahman MS, Abdelraheem NA, Abdu MT, El Koussy MR. Effect of welding heat
input on microstructure of Incoloy 28 and S31254. Bulletin of Tabbin Institute for Met-
allurgical Studies, July 2013.
[41] Abdelrahman MS, Abdelraheem NA, El Koussy MR. Effect of welding heat input on the
microstructure and properties of dissimilar weld joint between Incoloy 28 and superaus-
tenitic stainless steel. Acta Metall Sin (English Letters) 2014;27(2):259–66.
[42] Szklarska-Smialowska. Pitting and crevice corrosion. NACE Press; 2005.
[43] Garner A. The effect of autogenous welding on chloride pitting corrosion in austenitic
stainless steels. Corrosion 1979;35(3):108–14.
[44] Frankel GS. Pitting corrosion of metals: a review of the critical factors. J Electrochem
Soc 1998;145(6):2186–98.
[45] Wulpi DJ. Understanding how components fail. Metals Park, OH: American Society for
Metals; 1985.
[46] Davis JR. Metallurgy and properties of wrought stainless steel. In: Handbook of stainless
steel. Specialty handbook ASM. Materials Park, OH: ASM International; 1996.
[47] Yae KA, Souza VM, Tavares SSM. Microstructure and intergranular corrosion resistance
evaluation of AISI 304 Steel for high temperature service. Mater Charact 2008;59
(5):651–5.
[48] Prawoto Y, Moin A, Tadjuddin M, Wan Nik WB. Effect of microstructures on SCC of
steel: field failure analysis case study and laboratory test result. Eng Fail Anal 2011;18
(7):1858–66.
[49] Arafin MA, Szpunar JA. A new understanding of intergranular stress corrosion cracking
resistance of pipeline steel through grain boundary character and crystallographic texture
studies. Corros Sci 2009;51:119–28.
[50] Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and
Alloys in a Boiling Magnesium Chloride Solution, G36, vol. 03.02, Annual Book of
ASTM Standards, ASTM, 2002
[51] Bernasovsky ´ P. Case studies of welded steel structure failures. Acta Metal Slovaca
2013;159–70, Bratislava, Slovakia – Conference, http://dx.doi.org/10.12776/amsc.
v3.120 ISSN 1338-1660.