Page 221 - MEMS Mechanical Sensors

210 Inertial Sensors

Conf. Solid-State Sensors and Actuators (Transducer ’95), Stockholm, Sweden, 1995, pp.
663–665.
[49] Leung, A. M., et al., “Micromachined Accelerometer Based on Convection Heat Transfer,”
Proc. IEEE Micro Electro Mechanical Systems Workshop (MEMS’98), Heidelberg,
Germany, 1998, pp. 627–630.
[50] Abbaspour-Sani, E., R. S. Huang, and C. Y. Kwok, “A Linear Electromagnetic Accelerome-
ter,” Sensors and Actuators, Vol. A44, 1994, pp. 103–109.
[51] Clark, W. A., R. T. Howe, and R. Horowitz, “Surface Micromachined Z-Axis Vibratory
Rate Gyroscope,” Digest of Solid-State Sensors and Actuator Workshop, 1996, pp.
283–287.
[52] Oh, Y., et al., “A Surface-Micromachined Tunable Vibratory Gyroscope,” Proc. IEEE
Micro Electro Mechanical Systems Workshop (MEMS’98), Nagoya, Japan, 1999, pp.
272–277.
[53] Hashimoto, M., et al., “Silicon Angular Rate Sensor Using Electromagnetic Excitation and
Capacitive Detection,” Journal of Microelectromechanical Systems, Vol. 5, 1995, pp.
219–225.
[54] Choi, J., K. Minami, and M. Esashi, “Application of Deep Reactive Ion Etching for Silicon
Angular Rate Sensor,” Microsystem Technologies, Vol. 2, 1996, pp. 186–190.
[55] Lutz, M., et al., “A Precision Yaw Rate Sensor in Silicon Micromachining,” Proc. 9th Int.
Conf. Solid-State Sensors and Actuators (Transducer ’97), Vol. 2, Chicago, IL, 1997, pp.
847–850.
[56] Paoletti, F., M. A. Gretillat, and N. F. de Rooij, “A Silicon Vibrating Micromachined Gyro-
scope with Piezoresistive Detection and Electromagnetic Excitation,” Proc. IEEE Micro
Electro Mechanical Systems Workshop (MEMS’96), San Diego, CA, 1996, pp. 162–167.
[57] Voss, R., et al., “Silicon Angular Rate Sensor for Automotive Applications with Piezoelec-
tric Drive and Piezoresistive Readout,” Proc. 9th Intl. Conf. Solid-State Sensors and Actua-
tors (Transducer ’97), Vol. 2, Chicago, IL, 1997, pp. 879–882.
[58] Kubena, R. L, et al., “A New Tunnelling-Based Sensor for Inertial Rotation Rate Measure-
ments,” Journal of Microelectromechanical Systems, Vol. 8, 1999, pp. 439–447.
[59] Degani, O., et al., “Optimal Design and Noise Consideration of Micromachined Vibrating
Rate Gyroscope with Modulated Integrative Differential Optical Sensing,” Journal of
Microelectromechanical Systems, Vol. 7, No. 3, 1998, pp. 329–338.
[60] Geiger, W., et al., “A New Silicon Rate Gyroscope,” Sensors and Actuators, Vol. A73,
1999, pp. 45–51.
[61] Geiger, W., et al., “The Silicon Angular Rate Sensor System DAVED,” Sensors and Actua-
tors, Vol. A84, 2000, pp. 280–284.
[62] http://www.europractice.bosch.com.
[63] Putty, M. W., and K. Najafi, “A Micromachined Vibrating Ring Gyroscope,” Digest of
Solid-State Sensors and Actuators Workshop, Hilton Head, SC, 1994, pp. 213–220.
[64] Sparks, D. R., et al., “A CMOS Integrated Surface Micromachined Angular Rate Sensor: Its
Automotive Applications,” Proc. 9th Intl. Conf. Solid-State Sensors and Actuators (Trans-
ducer ’97), Vol. 2, Chicago, IL, 1997, pp. 851–854.
[65] Ayazi, F., et al., “A High Aspect-Ratio Polysilicon Vibrating Ring Gyroscope,” Digest of
Solid-State Sensors and Actuators Workshop, Hilton Head, SC, 2000, pp. 289–292.
[66] Ayazi, F., and K. Najafi, “A HARPSS Polysilicon Vibrating Ring Gyroscope,” Journal of
Microelectromechanical Systems, Vol. 10, No. 2, 2001, pp. 169–179.
[67] Junneau, T., A. P. Pisano, and J. H. Smith, “Dual Axis Operation of a Micromachined Rate
Gyroscope,” 9th Int. Conf. Solid-State Sensors and Actuators (Transducers ’97), Vol. 2,
Chicago, IL, 1997, pp. 883–886.
[68] An, S., et al., “Dual-Axis Microgyroscope with Closed Loop Detection,” Sensors and
Actuators, Vol. A73, 1999, pp. 1–6.