Page 48 - MEMS Mechanical Sensors

2.3 Fabrication Techniques 37

[8] Tseng, F.-G., and C.-S. Yu, “Fabrication of Ultrathick Micromolds Using JSR THB-430N
Negative Photoresist,” Transducers ’01, Munich, Germany, June 10–14, 2001, pp.
1620–1623.
[9] Kukharenka, E., et al., “Electroplating Moulds Using Dry Film Thick Negative Photore-
sist,” Micromechanics Europe MME ’02, Sinaia, Romania, October 6–8, 2002, pp. 95–98.
[10] Seidel, H., et al., “Anisotropic Etching of Crystalline Silicon in Alkaline Solutions I: Orien-
tation Dependence and Behavior of Passivation Layers,” Journal of the Electrochemical
Society, Vol. 137, No.11, 1990, pp. 3612–3626.
[11] Seidel, H., et al., “Anisotropic Etching of Crystalline Silicon in Alkaline Solutions II: Influ-
ence of Dopants,” Journal of the Electrochemical Society, Vol. 137, No. 11, 1990, pp.
3626–3632.
[12] Hoffmann, E., et al., “3D Structures with Piezoresistive Sensors in Standard CMOS,” Proc.
of IEEE Micro Electro Mechanical Systems, Amsterdam, the Netherlands, January 29–Feb-
ruary 2, 1995, pp. 288–293.
[13] Tabata, O., “pH-Controlled TMAH Etchants for Silicon Micromachining,” Sensors and
Actuators, Vol. A53, 1996, pp. 335–339.
[14] Klaassen, E., et al., “Micromachined Thermally Isolated Circuits,” Proc. of the 1996
Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC, June 3–6, 1996,
pp. 127–131.
[15] Moser, D., CMOS Flow Sensors, Doctoral dissertation, Swiss Federal Institute of Technol-
ogy, Zurich, Switzerland, 1993.
[16] Madou, M., Fundamentals of Microfarication, Boca Raton, FL: CRC, 1997.
[17] Bütefisch, S., A. Schoft, and S. Büttgenbach, “Three-Axes Monolithic Silicon Low-g Accel-
erometer,” J. Microelectromech. Syst., Vol. 9, 2000, pp. 551–556.
[18] Zielke, D., R. Lieske, and J. Will, “Automatic Transfer from Bulk-Silicon Technology
Simulation into the FEM-Environment,” Transducers ’01, Munich, Germany, June 10–14,
2001, pp. 272–275.
[19] Lärmer, F., and P. Schlip, “Method of Anisotropically Etching Silicon,” German Patent No.
DE 4,241,045, 1994.
[20] Howe, R., “Surface Micromachining for Microsensors and Microactuators,” Journal of
Vacuum Science and Technology B, Vol. 6, 1988, pp. 1809–1813.
[21] Berenschot, N., et al., “Advanced Sacrificial Poly-Si Technology for Fluidic Systems,”
Transducers ’01, Munich, Germany, June 10–14, 2001, pp. 624–627.
[22] Choi, Y.-S., et al., “Fabrication of a Solenoid-Type Microwave Transformer,” Transducers
’01, Munich, Germany, June 10–14, 2001, pp. 1564–1567.
[23] McNamara, S., and Y. Gianchandani, “A 19-Element Shock Sensor Array for Bi-
Directional Substrate-Plane Sensing Fabricated by Sacrificial LIGA,” Transducers ’01,
Munich, Germany, June 10–14, 2001, pp. 450–453.
[24] Scheepers, P., et al., “Investigation of Attractive Forces Between PECVD Silicon Nitride
Microstructures and an Oxidized Silicon Substrate,” Sensors and Actuators, Vol. A30,
1992, pp. 231–239.
[25] Takeshima, N., et al., “Electrostatic Parallelogram Actuators,” Transducers ’91, San Fran-
cisco, CA, June 24–27, 1991, pp. 63–66.
[26] Mulhern, G., D. Soane, and R. Howe, “Supercritical Carbon Dioxide Drying of Micro-
structures,” Transducers ’93, Yokahama, Japan, June 7–10, 1993, pp. 296–298.
[27] Lee, Y.-I., et al., “Dry Release for Surface Micromachining with HF Vapor-Phase Etching,”
J. Microelectromech. Syst., Vol. 6, 1997, pp. 226–233.
[28] Kim, B., et al., “A New Organic Modifier for Anti-Stiction,” J. Microelectromech. Syst.,
Vol. 10, 2001, pp. 33–40.
[29] Ashurst, W., et al., “Dichlorodimethylsilane as an Anti-Stiction Monolayer for MEMS: A
Comparison to the Octadecyltrichlosilane Self-Assembled Monolayer,” J. Microelectro-
mech. Syst., Vol. 10, 2001, pp. 41–49.