Page 49 - MEMS Mechanical Sensors

38 Materials and Fabrication Techniques

[30] Man, P., B. Gogoi, and T. Harada, “Fabrication of an S-Shaped Microactuator,” J. Microe-
lectromech. Syst., Vol. 6, 1997, pp. 25–34.
[31] Thompson, K., et al., “Si-Si Bonding Using RF and Microwave Radiation,” Transducers
’01, Munich, Germany, June 10–14, 2001, pp. 226–229.
[32] Wu, C.-H., et al., “Fabrication and Testing of Single Crystalline 3C-SiC Piezoresistive Pres-
sure Sensor,” Transducers ’01, Munich, Germany, June 10–14, 2001, pp. 514–517.
[33] Wallis, G., and D. Pomerantz, “Field Assisted Glass-Metal Sealing,” J. Appl. Phys., Vol. 40,
1969, pp. 3946–3949.
[34] Esashi, M., et al., “Low Temperature Silicon-to-Silicon Anodic Bonding with Intermediate
Low Melting Point Glass,” Sensors and Actuators, Vol. A23, 1990, pp. 931–934.
[35] de Reus, R., and M. Lindahl, “Si-to Si Wafer Bonding Using Evaporated Glass,” Transduc-
ers ’95, Chicago, IL, June 16–19, 1997, pp. 661–664.
[36] Quenzer, H., et al., “Anodic Bonding on Glass Layers Prepared by a Spin-On Glass Process:
Preparation Process and Experimental Results,” Transducers ’01, Munich, Germany, June
10–14, 2001, pp. 230–233.
[37] Valero, L., “The Fundamentals of Eutectic Die Attach,” Semiconductor International, Vol.
7, 1984, pp. 236–241.
[38] den Besten, C., et al., “Polymer Bonding of Micro-Machined Silicon Structures,” Micro
Electro Mechanical Systems ’92, Travemunde, Germany, February 4–7, 1992, pp. 104–108.
[39] Trigwell, S., “Die Attach Materials and Methods,” Solid Sate Technology, April 1995, pp.
63–69.
[40] Henmi, H., et al., “Vacuum Packaging for Microsensors by Glass-Silicon Anodic Bonding,”
Transducers ’93, Yokahama, Japan, June 7–10, 1993, pp. 584–587.
[41] Koch, M., et al., “A Novel Micropump Design with Thick-Film Piezoelectric Actuation,”
Measurement Science and Technology, Vol. 8, No. 1, 1997, pp. 49–57.
[42] White, N., and J. Turner, “Thick-Film Sensors: Past, Present and Future,” Measurement Sci-
ence and Technology, Vol. 8, No. 1, 1997, pp. 1–20.
[43] Wycisk, M., et al., “Low-Cost Post-CMOS Integration of Electroplated Microstructures for
Inertial Sensing,” Sensors and Actuators, Vol. A83, 2000, pp. 93–100.
[44] Kämper, K.-P., et al., “Microfluidic Components for Biological and Chemical Microreac-
tors,” Proc. of 10th Annual Workshop of Micro Electro Mechanical Systems (MEMS ’97),
Nagoya, Japan, January 26–30, 1997, pp. 338–343.
[45] Mohr, J., “MOEMS Fabricated by the LIGA Technique—An Overview,” Proc. MOEMS
’97, Nara, Japan, November 1997, pp. 221–226.
[46] Mohr, J., et al., “Moveable Microstructures Manufactured by the LIGA Process as Basic
Elements for Microsystems,” in Microsystems Technologies 90, H. Reichl, (ed.), Berlin,
Germany: Springer-Verlag, 1990, p. 529.
[47] Takahata, K., and Y. Gianchandani, “Batch Mode Micro-Electro-Discharge Machining,” J.
Microelectromech. Syst., Vol. 11, 2002, pp. 102–110.
[48] Pan, L.-W., and L. Lin, “Batch Transfer of LIGA Microstructures by Selective Electroplat-
ing and Bonding,” J. Microelectromech. Syst., Vol. 10, 2001, pp. 25–32.
[49] Reyntjens, S., and R. Puers, “RASTA: The Real-Acceleration-for-Self-Test Accelerometer,”
Transducers ’01, Munich, Germany, June 10–14, 2001, pp. 434–437.
[50] Reyntjens, S., D. De Bruyker, and R. Puers, “The NanoPirani—Presumably the World’s
Smallest Pressure Sensor,” Transducers ’01, Munich, Germany, June 10–14, 2001, pp.
490–493.