Page 246 -

MEMS Fabrication 3-201

Hoffmeister, W. (1969) Determination of the Etch Rate of Silicon in Buffered HF Using a 31Si Tracer
Method,” Int. J. Appl. Radiat. Isotope. 2, p. 139.
Holbrook, D.S., and McKibben, J.D. (1992) “Microlithography for Large Area Flat Panel Display
Substrates,” Solid State Technol. May, pp. 166–72.
Holland, C.E., Westerberg, E.R., Madou, M.J., and Otagawa, T. (1988) “Etching Method for Producing an
Electrochemical Cell in a Crystalline Substrate,” U.S. Patent 4,764,864.
Honer, K.A., and Kovacs, G.T.A. (2000) “Sputtered Silicon for Integrated MEMS Applications,” in Solid-
State Sensor and Actuator Workshop, Transducers Research Foundation, Hilton Head Island, SC,
pp. 308–11.
Horch, K., Normann, R.A., and Schmidt, S. (1993) “Biocompatibility of Silicon-Based Electrode Arrays
Implanted in Feline Cortical Tissue,” J. Biomed. Mater. Res. 27, pp. 1393–99.
Hornbeck, L.J. (1995) “Projection Displays and MEMS: Timely Convergence for a Bright
Future,” in Micromachining and Microfabrication Process Technology (Proceedings of the SPIE),
Austin, p. 2.
Houston, M.R., Maboudian, R., and Howe, R. (1995) “Ammonium Fluoride Anti-Stiction Treatment for
Polysilicon Microstructures,” in 8th International Conference on Solid-State Sensors and Actuators
(Transducers ’95), Stockholm, June, pp. 210–13.
Howe, R.T. (1985) “Polycrystalline Silicon Microstructures,” in Micromachining and Micropackaging
of Transducers, Fung, C.D., Cheung, P.W., Ko, W.H., and Fleming, D.G., eds., Elsevier, New York,
pp. 169–87.
Howe, R.T. (1995) “Recent Advances in Surface Micromachining,” in Technical Digest: 13th Sensor
Symposium, Tokyo, pp. 1–8.
Howe, R.T. (1995) “Polysilicon Integrated Microsystems: Technologies and Applications,” in 8th
International Conference on Solid-State Sensors and Actuators (Transducers ’95), Stockholm, June,
pp. 43–46.
Howe, R.T., and Muller, R.S. (1982) “Polycrystalline Silicon Micromechanical Beams,” in Spring Meeting
of the Electrochemical Society, Montreal, pp. 184–85.
Howe, R.T., and Muller, R.S. (1983) “Polycrystalline Silicon Micromechanical Beams,” J. Electrochem. Soc.
130, 1420–23.
Howe, R.T., and Muller, R.S. (1983) “Stress in Polycrystalline and Amorphous Silicon Thin Films,”J. Appl.
Phys. 54, pp. 4674–75.
Hu, J.Z., Merkle, L.D., Menoni, C.S., and Spain, I.L. (1986) “Crystal Data for High-Pressure Phases of
Silicon,” Phys. Rev. B 34, pp. 4679–84.
Hu, S.M., and Kerr, D.R. (1967) “Observation of Etching of n-Type Silicon in Aqueous HF Solutions,”
J. Electrochem. Soc. 114, p. 414.
Huff, M.A., and Schmidt, M.A. (1992) “Fabrication, Packaging, and Testing of a Wafer Bonded
Microvalve,”in Technical Digest: 1992 Solid State Sensor and Actuator Workshop, Hilton Head Island,
SC., pp. 194–197.
IMEC, “Silicon Detectors,” IMEC Brochure, 1994.
Iscoff, R. (1991) “Hotwall LP CVD Reactors: Considering the Choices,” Semicond. Int. June, pp. 60–64.
Jaccodine, R.J., and Schlegel, W.A. (1966) “Measurements of Strains at Si-SiO Interface,” J. Appl. Phys. 37,
2
pp. 2429–34.
Jackson, K.A. (1966) “A Review of the Fundamental Aspects of Crystal Growth,” Proceedings of an
International Conference on Crystal Growth, Boston, June 20–24, pp. 17–24.
Jackson, T.N., Tischler, M.A., and Wise, K.D. (1981) “An Electrochemical P-N Junction Etch-Stop for the
Formation of Silicon Microstructures,” IEEE Electron Device Lett. EDL-2, pp. 44–45.
Jenkins, M.W. (1977) “New Preferential Etch for Defects in Silicon Crystals”,J. Electrochem. Soc. 124, p. 757.
Jerman, H. (1994) “Bulk Silicon Micromachining,” hard copies of viewgraphs presented in Banff,
Canada.
Jerman, J.H. (1990) “The Fabrication and Use of Micromachined Corrugated Silicon Diaphragms,”
Sensor. Actuator. A A23, pp. 988–92.

© 2006 by Taylor & Francis Group, LLC