Page 251 -

3-206 MEMS: Design and Fabrication

Meek, R.L. “Electrochemically Thinned N/N Epitaxial Silicon: Method and Applications,” J.
Electrochem. Soc. 118, pp. 1240–46.
Mehregany, M., Gabriel, K.J., and Trimmer, W.S.N. (1988) “Integrated Fabrication of Polysilicon
Mechanisms,” IEEE Trans. Electron Devices 35, pp. 719–23.
Mehregany, M., Howe, R.T., and Senturia, S.D. (1987) “Novel Microstructures for the In Situ
Measurement of Mechanical Properties of Thin Films,” J. Appl. Phys. 62, pp. 3579–84.
Mehregany, M., and Senturia, S.D. (1988) “Anisotropic Etching of Silicon in Hydrazine,” Sensor. Actuator.
13, pp. 375–90.
Memming, R., and Schwandt, G. (1966) “Anodic Dissolution of Silicon in Hydrofluoric Acid Solutions,”
Surf. Sci. 4, pp. 109–24.
Metzger, H., and Kessler, F.R. (1970) “Der Debye-Sears Effect zur Bestimmung der Elastischen Konstanten
von Silicium,” Z. Naturf. A25, pp. 904–6.
Meyerson, B.S., and Olbricht, W. (1984) “Phosphorous-Doped Polycrystalline Silicon via LPCVD: 1.
Process Characterization,” J. Electrochem. Soc. 131, pp. 2361–65.
Middlehoek, S., and Audet, S.A. (1989) Silicon Sensors, Academic Press, San Diego.
Middlehoek, S., and Dauderstadt, U. (1994) “Haben Mikrosensoren aus Silizium eine Zukunft?”
Technische Rundschau July, pp. 102–5.
Mlcak, R., Tuller, H.L., Greiff, P., and Sohn, J. (1993) “Photo Assisted Electromechanical Machining of
Micromechanical Structures,” in Proceedings: IEEE Micro Electro Mechanical Systems (MEMS ’93),
Fort Lauderdale, pp. 225–29.
Monk, D.J., Soane, D.S., and Howe, R.T. (1992) “LPCVD Silicon Dioxide Sacrificial Layer Etching for
Surface Micromachining,” in Smart Materials Fabrication and Materials for Micro-Electro-
Mechanical Systems, San Francisco, pp. 303–10.
Monk, D.J., Soane, D.S., and Howe, R.T. (1994a) “Hydrofluoric Acid Etching of Silicon Dioxide Sacrifical
Layers: Part 1. Experimental Observations,” J. Electrochem. Soc. 141, pp. 264–69.
Monk, D.J., Soane, D.S., and Howe, R.T. (1994b) “Hydrofluoric Acid Etching of Silicon Dioxide Sacrificial
Layers: Part 2. Modeling,” J. Electrochem. Soc. 141, pp. 270–74.
Morkoc, H., Unlu, H., Zabel, H., and Otsuka, N. (1988) “Gallium Arsenide on Silicon: A Review,” Solid
State Technol. March, pp. 71–6.
Morrison, S.R. (1980) Electrochemistry on Semiconductors and Oxidized Metal Electrodes, Plenum Press,
New York.
Moulin, A.M. (2000) “Microcantilever-Based Biosensors,” Ultramicroscopy 82, pp. 23–31.
Mulder, J.G.M., Eppenga, P., Hendriks, M., and Tong, J.E. (1990) “An Industrial LP CVD Process for
In Situ Phosphorus-Doped Polysilicon,” J. Electrochem. Soc. 137, pp. 273–79.
Mulhern, G.T., Soane, D.S., and Howe, R.T. (1993) “Supercritical Carbon Dioxide Drying of
Microstructures,” in 7th International Conference on Solid-State Sensors and Actuators (Transducers
’93), Yokohama, pp. 296–99.
Muller, R.S. (1987) “From ICs to Microstructures: Materials and Technologies,” in Proceedings: IEEE
Micro Robots and Teleoperators Workshop, Hyannis, MA, pp. 2/1–5.
Muraoka, H., Ohashi, T., and Sumitomo, T. (1973) “Controlled Preferential Etching Technology,” in
Semiconductor Silicon 1973, Chicago pp. 327–38.
Murarka, S.P., and Retajczyk, T.F.J. (1983) “Effect of Phosphorous Doping on Stress in Silicon and
Polycrystalline Silicon,” J. Appl. Phys. 54, pp. 2069–72.
Nakamura, M., Hoshino, S., and Muro, H. (1985) “Monolithic Sensor Device for Detecting Mechanical
Vibration,” in Densi Tokyo, 24 (IEE Tokyo Section, pp. 87–88.
Nathanson, H.C., Newell, W.E., Wickstrom, R.A., and Davis, J.R. (1967) “The Resonant Gate Transistor,”
IEEE Trans. Electron Devices ED-14, pp. 117–33.
National Semiconductor (1974) “Transducers, Pressure, and Temperature,” catalog, Sunnyvale, CA.
Neudeck, G.W., et al. (1990) “Three Dimensional Devices Fabricated by Silicon Epitaxial Lateral
Overgrowth,” J. Electron. Mater. 19, pp. 1111–17.

© 2006 by Taylor & Francis Group, LLC