Page 255 -

3-210 MEMS: Design and Fabrication

Seidel, H., and Csepregi, L. (1988) “Advanced Methods for the Micromachining of Silicon,” in Technical
Digest: 7th Sensor Symposium, Tokyo, pp. 1–6.
Seidel, H., Csepregi, L., Heuberger, A., and Baumgartel, H. (1990a) “Anisotropic Etching of Crystalline
Silicon in Alkaline Solutions: 2. Influence of Dopants,” J. Electrochem. Soc. 137, pp. 3626–32.
Seidel, H., Csepregi, L., Heuberger, A., and Baumgartel, H. (1990b) “Anisotropic Etching of Crystalline
Silicon in Alkaline Solutions: 1. Orientation Dependence and Behavior of Passivation Layers,”
J. Electrochem. Soc., 137, pp. 3612–26.
Sekimoto, M., Yoshihara, H., and Ohkubo, T. (1982) “Silicon Nitride Single-Layer X-ray Mask,”J. Vac. Sci.
Technol. 21, pp. 1017–21.
Senturia, S. (1987) “Can We Design Microrobotic Devices Without Knowing the Mechanical Properties
of Materials?” in Proceedings: IEEE Micro Robots and Teleoperators Workshop, Hyannis, MA,
pp. 3/1–5.
Senturia, S.D., and Howe, R.T. (1990) Mechanical Properties and CAD, lecture notes, Massachusetts
Institute of Technology.
Sharpe, W.N., Yuan, B., Vaidyanathan, R., and Edwards, R.L. (1997) “Measurements of Young’s Modulus,
Poisson’s Ratio, and Tensile Strength of Polysilicon,” in Tenth IEEE International Workshop on
Microelectromechanical Systems, Nagoya, Japan, pp. 424–29.
Shengliang, Z., Zongmin, Z., and Enke, L. (1987) “The NH F Electrochemical Etching Method of Silicon
4
Diaphragm for Miniature Solid-State Pressure Transducer,” in 4th International Conference on
Solid-State Sensors and Actuators (Transducers ’87), Tokyo, pp. 130–33.
Shimbo, M., Furukawa, K., and Tanzawa, K. (1986) “Silicon-to-Silicon Direct Bonding Method,” J. Appl.
Phys. 60, pp. 2987–89.
Shimizu, T., and Ishihara, S. (1995) “Effect of SiO Surface Treatment on the Solid-Phase Crystallization
2
of Amorphous Silicon Films,” J. Electrochem. Soc. 142, pp. 298–302.
Shockley, W. (1963) “Method of Making Thin Slices of Semiconductive Material,” U.S. Patent 3,096,262.
Singer, P. (1992) “Film Stress and How to Measure It,” Semicond. Int. 15, pp. 54–58.
Sinha, A.K., and Smith, T.E. (1978) “Thermal Stresses and Cracking Resistance of Dielectric Films,”
J. Appl. Phys. 49, pp. 2423–26.
Sirtl, E., and Adler, A. (1961) “Chromsaure-Flusssaure Als Spezifisches System Zur Atzgrubenentwicklung
Auf Silizium”, Z. Metallkd. 52, p. 529.
Smith, C.S. (1954) “Piezoresistance Effect in Germanium and Silicon,” Phys. Rev. 94, pp. 42–49.
Smith, J., Montague, S., Sniegowski, J., and McWhorter, P. (1995) “Embedded Micromechanical Devices
for Monolithic Integration of MEMs with CMOS,” in Technical Digest: IEEE International Electron
Devices Meeting (IEDM ’95), Washington, DC, pp. 609–12.
Smith, R.L., and Collins, S.D. (1990) “Thick Films of Silicon Nitride,” Sensor. Actuator. A A23, pp. 830–34.
Spear, W.E., and Comber, P.G.L. (1975) “Substitutional Doping of Amorphous Silicon,” Solid State
Commun. 17, pp. 1193–96.
Spiering, V.L., Bouwstra, S., Burger, J., and Elwenspoek, M. (1993) “Membranes Fabricated with a Deep
Single Corrugation for Package Stress Reduction and Residual Stress Relief,” in 4th European
Workshop on Micromechanics (MME ’93), Neuchatel, Switzerland, pp. 223–27.
Spiering, V.L., Bouwstra, S., Spiering, R.M.E.J., and Elwenspoek, M. (1991) “On-Chip Decoupling Zone
for Package-Stress Reduction,” in 6th International Conference on Solid-State Sensors and Actuators
(Transducers ’91), San Francisco, pp. 982–85.
Steinsland, E., Nese, M., Hanneborg, A., Bernstein, R.W., Sandmo, H., and Kittilsland, G. (1995) “Boron-
Etch Stop in TMAH Solutions,” in Proc. Transducers ’95, 8th Int. Conf. Solid-State Sensors and
Actuators, Stockholm, pp. 190–93.
Stoller, A.I. (1970) “The Etching of Deep Vertical-Walled Patterns in Silicon,” RCA Rev. 31, pp. 271–75.
Stoller, A.I., Speers, R.F., and Opresko, S. (1970) “A New Technique for Etch Thinning Silicon Wafers,”
RCA Rev. 31, pp. 265–70.
Stoller, A.I., and Wolff, N.E. (1966) “Isolation Techniques for Integrated Circuits,” in Proceedings: Second
International Symposium on Microelectronics, Munich, 1966.

© 2006 by Taylor & Francis Group, LLC