Page 257 -

3-212 MEMS: Design and Fabrication

Tong, Q.-Y., Cha, G., Gafiteanu, R., and Gosele, U. (1994) “Low Temperature Wafer Direct Bonding,” J.
Microelectromech. Syst. 3, pp. 29–35.
Tortonese, M., Barrett, R.C., and Quate, C.F. (1993) “Atomic Resolution with an Atomic Force Microscope
Using Piezoresistive Detection,” Appl. Phys. Lett. 62, pp. 834–36.
Tortonese, M., Yamada, H., Barrett, R.C., and Quate, C.F. (1991) “Atomic Force Microscopy Using a
Piezoresistive Cantilever,” in Proceedings: Transducers ’91., IEEE, Piscataway, NJ, pp. 448–51.
Tuck, B. (1975) “Review: The Chemical Polishing of Semiconductors,” J. Mater. Sci. 10, pp. 321–39.
Tuckerman, D.B., and Pease, R.F.W. (1981) “High-Performance Heat Sinking for VLSI,” IEEE Electron
Device Lett. EDL-2, pp. 126–29.
Tufte, O.N., Chapman, P.W., and Long, D. (1962) “Silicon Diffused-Element Piezoresistive Diaphragms,”
J. Appl. Phys. 33, p. 3322.
Turner, D.R. (1958) “Electropolishing Silicon in Hydrofluoric Acid Solutions,” J. Electrochem. Soc. 105,
pp. 402–8.
Uhlir, A. (1956) “Electrolytic Shaping of Germanium and Silicon,” Bell Syst. Tech. J. 35, pp. 333–47.
Unagami, T. (1980) “Formation Mechanism of Porous Silicon Layer by Anodization in HF Solution,”
J. Electrochem. Soc. 127, pp. 476–83.
van Dijk, H.J.A. (1972) “Method of Manufacturing a Semiconductor Device and Semiconductor Device
Manufactured by Said Method,” U.S. Patent 3,640,807.
van Dijk, H.J.A., and de Jonge, J. (1970) “Preparation of Thin Silicon Crystals by Electrochemical
Thinning of Epitaxially Grown Structures,” J. Electrochem. Soc. 117, pp. 553–54.
van der Drift, A. (1967) “Evolutionary Selection: A Principle Governing Growth Orientation in Vapour-
Deposited Layers,” Philips Res. Rep. 22, pp. 267–88.
van Mullem, C.J., Gabriel, K.J., and Fujita, H. (1991) “Large Deflection Performance of Surface
Micromachined Corrugated Diaphragms,” in 6th International Conference on Solid-State Sensors
and Actuators (Transducers ’91), San Francisco, pp. 1014–17.
Varadan, V.K., and P.J. McWhorter, eds., “Smart Electronics and MEMS,” Proceedings of the Smart
Structures and Materials 1996 Meeting, San Diego: SPIE 2722, pp. 46–54.
Vinci, R.P., and Braveman, J.C. (1991) “Mechanical Testing of Thin Films,” in 6th International Conference
on Solid-State Sensors and Actuators (Transducers ’91), San Francisco, pp. 943–48.
von Recum, Andreas, F., Cooke and Francis, W.“Soft Tissue Implants with Micron Scale Surface Texture,”
U.S. Patents 4,871,366 and 4,846,834.
Voronin, V.A., Druzhinin, A.A., Marjamora, I.I., Kostur, V.G., and Pankov, J.M. (1992) “Laser-
Recrystallized Polysilicon Layers in Sensors,” Sensor. Actuator. A A30, pp. 143–47.
Waggener, H.A. (1970) “Electrochemically Controlled Thinning of Silicon,” Bell. Sys. Tech. J. 49, pp. 473–75.
Waggener, H.A., and Dalton, J.V. (1972) “Control of Silicon Etch Rates in Hot Alkaline Solutions by
Externally Applied Potentials,” J. Electrochem. Soc. 119, p. 236C.
Waggener, H.A., Kragness, R.C., and Tyler, A.L. (1976a) “Anisotropic Etching for Forming Isolation Slots
in Silicon Beam Leaded Integrated Circuits,”in Technical Digest: IEEE International Electron Devices
Meeting, Washington, DC, p. 68.
Waggener, H.A., Krageness, R.C., and Tyler, A.L. (1967b) “Two-Way Etch,” Electronics 40, p. 274.
Walker, J.A., Gabriel, K.J., and Mehregany, M. (1991) “Mechanical Integrity of Polysilicon Films Exposed
to Hydrofluoric Acid Solutions,” J. Electron. Mater. 20, pp. 665–70.
Watanabe, H., Ohnishi, S., Honma, I., Kitajima, H., Ono, H., Wilhelm, R.J., and Sophie, A.J.L. (1995)
“Selective Etching of Phosphosilicate Glass with Low Pressure Vapor HF,” J. Electrochem. Soc. 142,
pp. 237–43.
Watanabe, Y., Arita, Y., Yokoyama, T., and Igarashi, Y. (1975) “Formation and Properties of Porous Silicon
and Its Applications,” J. Electrochem. Soc. 122, pp. 1351–55.
Weinberg, M., Bernstein, J., Borenstein, J., Campbell, J., Cousens, J., Cunningham, B., Fields, R., Greiff, P.,
Hugh, B., Niles, L., and Sohn, J. (1996) “Micromachining Inertial Instruments,” in Micromachining
and Microfabrication Process Technology 2, Austin, pp. 26–36.

© 2006 by Taylor & Francis Group, LLC