Page 258 -

MEMS Fabrication 3-213

Weirauch, D.F. (1975) “Correlation of the Anisotropic Etching of Single-Crystal Silicon Spheres and
Wafers,” J. Appl. Phys. 46, pp. 1478–83.

Wen, C.P., and Weller, K.P. (1972) “Preferential Electro-Chemical Etching of p Silicon in an Aqueous
HF-H SO Electrolyte,” J. Electrochem. Soc. 119, pp. 547–48.
2
4
White, L.K. (1980) “Bilayer Taper Etching of Field Oxides and Passivation Layers,”J. Electrochem. Soc. 127,
pp. 2687–93.
Williams, K.R., and Muller, R.S. (1996) “Etch Rates for Micromachining Processes,” J. Electrochem. Soc.
137, pp. 3612–32.
Wise, K.D., Robinson, M.G., and Hillegas, W.J. (1981) “Solid State Processes to Produce Hemispherical
Components for Inertial Fusion Targets,” J. Vac. Sci. Technol. 18, pp. 1179–82.
Wise, K.D., Robinson, M.G., and Hillegas, W.J. (1985) “Silicon Micromachining and Its Applications to
High Performance Integrated Sensors,” in Micromachining and Micropackaging of Transducers,
Fung, C.D., Cheung, P.W., Ko, W.H., and Fleming, D.G. eds., Elsevier, New York, pp. 3–18.
Wolf, S., and Tauber, R.N. (1987) Silicon Processing for the VLSI Era, Lattice Press, Sunset Beach.
Wong, A. (1990) “Silicon Micromachining,” viewgraphs presented in Chicago.
Wong, S.M. (1978) “Residual Stress Measurements on Chromium Films by X-ray Diffraction Using the
sin2 Y Method,” Thin Solid Films 53, pp. 65–71.
Worthman, J.J., and Evans, R.A. (1965) “Young’s Modulus, Shear Modulus, and Poisson’s Ratio in Silicon
and Germanium,” J. Appl. Phys. 36, pp. 153–56.
Wu, T.H.T., and Rosler, R.S. (1992) “Stress in PSG and Nitride Films as Related to Film Properties and
Annealing,” Solid State Technol. May, pp. 65–71.
Wu, X., and Ko, W.H. (1987) “A Study on Compensating Corner Undercutting in Anisotropic Etching of
(100) Silicon,” in 4th International Conference on Solid-State Sensors and Actuators (Transducers
’87), Tokyo, pp. 126–29.
Wu, X.P., Wu, Q.H., and Ko, W.H. (1985) “A Study on Deep Etching of Silicon Using EPW,” in 3rd
International Conference on Solid-State Sensors and Actuators (Transducers ’85), Philadelphia, pp.
291–94.
Wu, X.P., Wu, Q.H., and Ko, W.H. (1986) “A Study on Deep Etching of Silicon Using Ethylene-Diamine-
Pyrocathechol-Water,” Sensor. Actuator. 9, pp. 333–43.
Wu, X.-P., and Ko, W.H. (1989) “Compensating Corner Undercutting in Anisotropic Etching of (100)
Silicon,” Sensor. Actuator. 18, pp. 207–15.
Yamada, K., and Kuriyama, T. (1991) “A New Modal Mode Controlling Method for a Surface Format
Surrounding Mass Acceleromenter,” in 6th International Conference on Solid-State Sensors and
Actuators (Transducers ’91), San Francisco, pp. 655–58.
Yamana, M., Kashiwazaki, N., Kinoshita, A., Nakano, T., Yamamoto, M., and Walton, W.C. (1990) “Porous
Silicon Oxide Layer Formation by the Electrochemical Treatment of a Porous Silicon Layer,” J.
Electrochem. Soc. 137, pp. 2925–27.
Yang, K.H. (1984) “An Etch for Delineation of Defects in Silicon,” J. Electrochem. Soc. 131, pp. 1140–45.
Yeh, H.J., and Smith, J.S. (1994a) “Fluidic Self-Assembly of Microstructures and Its Application to the
Integration of GaAs on Si,” in IEEE International Workshop on Micro Electro Mechanical Systems
(MEMS ‘94), Oiso, Japan, pp. 279–84.
Yeh, H.J., and Smith, J.S. (1994b) “Integration of GaAs Vertical-Cavity Surface-Emitting Laser on Si by
Substrate Removal,” Appl. Phys. Lett. 64, pp. 1466–68.
Yeh, R., Kruglick, E.J., and Pister, K.S.J. (1994) “Towards an Articulated Silicon Microrobot,” in ASME
1994, Micromechanical Sensors, Actuators, and Systems, Chicago, pp. 747–54.
Yi, Y.W., and Liu, C. (1999) “Magnetic Actuation of Hinged Microstructures,” J. Microelectromech. Syst. 8,
pp. 10–17.
Yoshida, T., Kudo, T., and Ikeda, K. (1992) “Photo-Induced Preferential Anodization for Fabrication of
Monocrystalline Micromechanical Structures,” in Proceedings: IEEE Micro Electro Mechanical
Systems (MEMS ’92), Travemunde, Germany, pp. 56–61.

© 2006 by Taylor & Francis Group, LLC