Page 259 -

3-214 MEMS: Design and Fabrication

Yun, W. (1992) A Surface Micromachined Accelerometer with Integrated CMOS Detection Circuitry,
Ph.D. thesis, University of California, Berkeley.
Zhang, L.M., Uttamchandani, D., and Culshaw, B. (1991) “Measurement of the Mechanical Properties of
Silicon Microresonators,” Sensor. Actuator. A A29, pp. 79–84, 1991.
Zhang, M., Desai, T., and Ferrari, M. (1998) “Proteins and Cells on PEG Immobilized Silicon Surfaces
Biomaterials,” Biomaterials 19, 953–60.
Zhang, Q., Liu, L.L., and Li, Z. (1996) “A New Approach to Convex Corner Compensation for Anisotropic
Etching of (100) Si in KOH,” Sensor. Actuator. A 56, p. 251.
Zhang, X.G. (1991) “Mechanism of Pore Formation on n-Type Silicon,” J. Electrochem. Soc. 138,
pp. 3750–56.
Zhang, X.G., Collins, S.D., and Smith, R.L. (1989) “Porous Silicon Formation and Electropolishing of
Silicon by Anodic Polarization in HF Solution,” J. Electrochem. Soc. 136, pp. 1561–65.
Zhang, Y., and Wise, K.D. (1994) “Performance of Non-Planar Silicon Diaphragms under Large
Deflections,” J. Microelectromech. Syst. 3, pp. 59–68.
Zhang, Z.L., and MacDonald, N.C. (1993) “Fabrication of Submicron High-Aspect-Ratio GaAs
Actuators,” J. Microelectromech. Syst. 2, pp. 66–73.

© 2006 by Taylor & Francis Group, LLC