Page 254 -

MEMS Fabrication 3-209

Ross, M., and Pister, K. (1994) “Micro-Windmill for Optical Scanning and Flow Measurement,” in
Eurosensors 8 (Sens. Actuators A), Toulouse, France, pp. 576–79.
Routkevitch, D., Govyadinov, A., and Mardilovich, P. (2000) “High Aspect Ratio, High Resolution
Ceramic Mems,” in 2000 International Mechanical Engineering Congress and Exposition, pp. 1–6.
Roy, S., McIlwain, A.K., DeAnna, R.G., Fleischman, A.J., Burla, R.K., Zorman, C.A., and Mehregany, M.
(2000) “SiC Resonator Devices for High Q and High Temperature Applications,”in Solid-State Sensor
and Actuator Workshop, Transducers Research Foundation, Hilton Head Island, SC, pp. 22–25.
Sakimoto, M., Yoshihara, H., and Ohkubo, T. (1982) “Silicon Nitride Single-Layer X-ray Mask,”J. Vac. Sci.
Technol. 21, pp. 1017–21.
Samaun, S., Wise, K.D., and Angell, J.B. (1973) “An IC Piezoresistive Pressure Sensor for Biomedical
Instrumentation,” IEEE Trans. Biomed. Eng. 20, pp. 101–9.
Sandifer, J.R., and Voycheck, J.J. (1999) “A Review of Biosensor and Industrial Applications of pH-ISFETs
and an Evaluation of Honeywell’s ‘DuraFET,’” Mikrochim. Acta 131, pp. 91–98.
Sandmaier, H., Offereins, H.L., Kuhl, K., and Lang, W. (1991) “Corner Compensation Techniques in
Anisotropic Etching of (100)-Silicon Using Aqueous KOH,” in 6th International Conference on
Solid-State Sensors and Actuators (Transducers ’91), San Francisco, pp. 456–59.
Saro, P.M., and van Herwaarden, A.W. (1986) “Silicon Cantilever Beams Fabricated by Electrochemically
Controlled Etching for Sensor Applications,” J. Electrochem. Soc. 133, pp. 1722–29.
Scheeper, P.R., Olthuis, W., and Bergveld, P. (1991) “Fabrication of a Subminiature Silicon Condenser
Microphone Using the Sacrificial Layer Technique,” in 6th International Conference on Solid-State
Sensors and Actuators (Transducers ’91), San Francisco, pp. 408–11.
Scheeper, P.R., Olthuis, W., and Bergveld, P. (1994) “The Design, Fabrication, and Testing of Corrugated
Silicon Nitride Diaphragms,” J. Microelectromech. Syst. 3, pp. 36–42.
Schimmel, D.G. (1979) “Defect Etch for (100) Silicon Evaluation”, J. Electrochem. Soc. 126, p. 479.
Schimmel, D.G., and Elkind, M.J. (1973) “An Examination of the Chemical Staining of Silicon,”
J. Electrochem. Soc. 125, pp. 152–55.
Schnable, G.L., and Schmidt, P.F. (1976) “Applications of Electrochemistry to Fabrication of
Semiconductor Devices,” J. Electrochem. Soc. 123, pp. 310C–15C.
Schnakenberg, U., Benecke, W., and Lochel, B. (1990) “NH OH-Based Etchants for Silicon
4
Micromachining,” Sensor. Actuator. A A23, pp. 1031–35.
Schubert, P.J., and Neudeck, G.W. (1990) “Confined Lateral Selective Epitaxial Growth of Silicon for
Device Fabrication,” IEEE Electron Device Lett. 11, pp. 181–83.
Schumacher, A., Wagner, H.-J., and Alavi, M. (1994) “Mit Laser und Kalilauge,” Technische Rundschau 86,
pp. 20–23.
Schwartz, B., and Robbins, H. (1961) “Chemical Etching of Silicon-III: A Temperature Study in the Acid
System,” J. Electrochem. Soc. 108, pp. 365–72.
Schwartz, B., and Robbins, H. (1976) “Chemical Etching of Silicon-IV: Etching Technology,”
J. Electrochem. Soc. 123, pp. 1903–9.
Searson, P.C., Prokes, S.M., and Glembocki, O.J. (1993) “Luminescence at the Porous Silicon/Electrolyte
Interface,” J. Electrochem. Soc. 140, pp. 3327–31.
Seetharaman, S., Ke-Qin, H., and Madou, M. (2000) “Microactuators toward Microvalves for Responsive
Controlled Drug Delivery,” Sensor. Actuator. B 67, pp. 149–60.
Seidel, H. (1986) “Der Mechanismus des Siliziumätzens in alkalischen Lösungen”, Ph.D. thesis, FU Berlin,
Germany.
Seidel, H. (1987) “The Mechanism of Anisotropic Silicon Etching and Its Relevance for Micromachining,”
in Digest of Technical Papers, Transducers ’87, 4th Intl. Conf. Solid-State Sensors and Actuators,
pp. 120–25.
Seidel, H. (1989) “Nasschemische Tiefenatztechnik,” in Mikromechanik, Heuberger, A., ed., Springer Verlag,
Heidelberg.
Seidel, H. (1990) “The Mechanism of Anisotropic Electrochemical Silicon Etching in Alkaline Solutions,” in
Technical Digest: 1990 Solid State Sensor and Actuator Workshop, Hilton Head Island, SC, pp. 86–91.

© 2006 by Taylor & Francis Group, LLC