Page 253 -

3-208 MEMS: Design and Fabrication

Peeters, E., Lapadatu, D., Sansen, W., and Puers, B. (1993b) “Developments in Etch-Stop Techniques,”pre-
sented at 4th European Workshop on Micromechanics (MME ’93), Neuchatel, Switzerland.
Petersen, K., Gee, D., Pourahmadi, F., Craddock, R., Brown, J., and Christel, L. (1991) “Surface
Micromachined Structures Fabricated with Silicon Fusion Bonding,” in 6th International
Conference on Solid-State Sensors and Actuators (Transducers ’91), San Francisco, pp. 397–99.
Petersen, K.E. (1982) “Silicon as a Mechanical Material,” Proceedings of the IEEE 70, pp. 420–57.
Pfann, W.G. (1961) “Improvement of Semiconducting Devices by Elastic Strain,” Solid State Electron. 3,
pp. 261–67.
Pister, K.S.J. (1992) “Hinged Polysilicon Structures with Integrated CMOS TFTs,”in Technical Digest: 1992
Solid State Sensor and Actuator Workshop, Hilton Head Island, SC, pp. 136–39.
Pliskin, W.A. (1977) “Comparison of Properties of Dielectric Films Deposited by Various Methods,”
J. Vac. Sci. Technol. 14, pp. 1064–81.
Pool, R. (1988) “Microscopic Motor Is a First Step,” Res. News October, pp. 379–80.
Pourahmadi, F., Christel, L., and Petersen, K. (1992) “Silicon Accelerometer with New Thermal Self-Test
Mechanism,” in Technical Digest: 1992 Solid State Sensor and Actuator Workshop, Hilton Head
Island, SC, pp. 122–25.
Pratt, R.I., Johnson, G.C., Howe, R.T., and Chang, J.C. (1991) “Micromechanical Structures for Thin Film
Characterization,” in 6th International Conference on Solid-State Sensors and Actuators (Transducers
’91), San Francisco, pp. 205–8.
Pratt, R.I., Johnson, G.C., Howe, R.T., and Nikkel, D.J.J. (1992) “Characterization of Thin Films Using
Micromechanical Structures,” Mat. Res. Soc. Symp. Proc. 276, pp. 197–202.
Price, J.B. (1973) “Anisotropic Etching of Silicon with KOH-H O-Isopropyl Alcohol,” in Semiconductor
2
Silicon 1973, Chicago, pp. 339–53.
Puers, B., and Sansen, W. (1990) “Compensation Structures for Convex Corner Micromachining in
Silicon,” Sensor. Actuator. A A23, pp. 1036–41.
Puers, R. (1991) “Mechanical Silicon Sensors at K.U. Leuven,” in Proceedings: Themadag Sensoren,
Rotterdam, pp. 1–8.
Pugacz-Muraszkiewicz, I.J., and Hammond, B.R. (1977) “Application of Silicates to the Detection
of Flaws in Glassy Passivation Films Deposited on Silicon Substrates,” J. Vac. Sci Technol. 14,
pp. 49–53.
Raley, N.F., Sugiyama, F., and Duzer, T.V. (1984) “(100) Silicon Etch-Rate Dependence on Boron
Concentration in Ethylenediamine-Pyrocatechol-Water Solutions,” J. Electrochem. Soc. 131,
pp. 161–71.
Reay, R.J., Klaassen, E.H., and Kovacs, G.T.A. (1994) “Thermally and Electrically Isolated Single-Crystal
Silicon Structures in CMOS Technology,” IEEE Electron Device Lett. 15, pp. 309–401.
Rehrig, D.L. (1990) “In Search of Precise Epi Thickness Measurements,” Semicond. Int. 13, pp. 90–95.
Reisman, A., Berkenbilt, M., Chan, S.A., Kaufman, F.B., and Green, D.C. (1979) “The Controlled Etching
of Silicon in Catalyzed Ethylene-Diamine-Pyrocathechol-Water Solutions,” Electrochem. Soc. 126,
pp. 1406–14.
Retajczyk, T.F.J., and Sinha, A.K. (1980) “Elastic Stiffness and Thermal Expansion Coefficients of Various
Refractory Silicides and Silicon Nitride Films,” Thin Solid Films 70, pp. 241–47.
Robbins, H., and Schwartz, B. (1959) “Chemical Etching of Silicon: 1. The System, HF, HNO , and H O,”
3 2
J. Electrochem. Soc. 106, pp. 505–8.
Robbins, H., and Schwartz, B. (1960) “Chemical Etching of Silicon: 2. The System HF, HNO , H O, and
3 2
HC C O ,” J. Electrochem. Soc. 107, pp. 108–11.
2
3
2
Rodgers, T.J., Hiltpold, W.R., Frederick, B., Barnes, J.J., Jenné, F.B., and Trotter, J.D. (1977) “VMOS
Memory Technology,” IEEE J. Solid-State Circuits SC-12, pp. 515–23.
Rodgers, T.J., Hiltpold, W.R., Zimmer, J.W., Marr, G., and Trotter, J.D. (1976) “VMOS ROM,” IEEE
J. Solid-State Circuits SC-11, pp. 614–22.
Rosler, R.S., “The Evolution of Commercial Plasma Enhanced CVD Systems,” Solid State Technol. June,
pp. 67–71.

© 2006 by Taylor & Francis Group, LLC