Page 252 -

MEMS Fabrication 3-207

Nguyen, C.T.-C. (1988) “Frequency-Selective MEMS for Miniaturized Communication Devices,” in
Aerospace Conference, Snowmass, Colo.: IEEE 1, pp. 445–60.
Nikanorov, S.P., Burenkov, Y.A., and Stepanov, A.V. (1972) “Elastic Properties of Silicon,” Sov. Phys.Solid
State 13, pp. 2516–18.
Nikpour, B., Landsberger, L.M., Hubbard, T.J., Kahrizi, M., and Iftimie, A. (1998) “Concave Corner
Compensation between Vertical (010)–(001) Planes Anisotropically Etched in Si(100),” Sensor.
Actuator. A 66, p. 299.
Nishioka, T., Shinoda, Y., and Ohmachi, Y. (1985) “Raman Microprobe Analysis of Stress in Ge and
GaAs/Ge on Silicon Dioxide-Coated Silicon Substrates,” J. Appl. Phys. 57, pp. 276–81.
North, J.C., McGahan, T.E., Rice, D.W., and Adams, A.C. (1978) “Tapered Windows in Phosphorous-
Doped Silicon Dioxide by Ion Implantation,” IEEE Trans. Electron Devices ED-25, pp. 809–12.
Noworolski, J.M., Klaassen, E., Logan, J., Petersen, K., and Maluf, N. (1995) “Fabrication of SOI Wafers
with Buried Cavities Using Silicon Fusion Bonding and Electrochemical Etchback,” in
8th International Conference on Solid-State Sensors and Actuators (Transducers ’95), Stockholm,
pp. 71–74.
Nunn, T., and Angell, J. (1975) “An IC Absolute Pressure Transducer with Built-in Reference Chamber,” in
Workshop on Indwelling Pressure Transducers and Systems, Cleveland, pp. 133–36.
Obermeier,E.(1995) “High Temperature Microsensors Based on Polycrystalline Diamond Thin Films,”in 8th
International Conference on Solid-State Sensors and Actuators (Transducers ’95), Stockholm, pp. 178–81.
Obermeier, E., and Kopystynski, P. (1992) “Polysilion as a Material for Microsensor Applications,” Sensor.
Actuator. A A30, pp. 149–55.
Oden, P.I., Chen, G.Y., Steele, R.A., Warmack, R.J., and Thundat, T. (1996) “Viscous Drag Measurements
Utilizing Microfabricated Cantilevers,” Appl. Phys. Lett. 68, pp. 1465–69.
Offereins, H.L., Sandmaier, H., Folkmer, B., Steger, U., and Lang, W. (1991) “Stress Free Assembly
Technique for a Silicon Based Pressure Sensor,” in 6th International Conference on Solid-State
Sensors and Actuators (Transducers ’91), San Francisco, pp. 986–89.
Ohwada, K., Negoro, Y., Konaka, U., and Oguchi, T. (1995) “Groove Depth Uniformization in (110) Si
Anisotropic Etching by Ultrasonic Wave and Application to Accelerometer Fabrication,” in
Proceedings: IEEE Micro Electro Mechanical Systems Conference, Amsterdam, pp. 100–5.
O’Neill, P. (1980) “A Monolithic Thermal Converter,” Hewlett-Packard J. 31, pp. 12–13.
Orpana, M., and Korhonen, A.O. (1991) “Control of Residual Stress in Polysilicon Thin Films by Heavy
Doping in Surface Micromachining,” in 6th International Conference on Solid-State Sensors and
Actuators (Transducers ’91), San Francisco, pp. 957–60.
O’Shea, S.J., Welland, M.E., Brunt, T.A., Ramadan, A.R., and Rayment, T. (1996) J. Vac. Sci. Technol. B14,
p. 1383.
Palik, E.D., Bermudez, V.M., and Glembocki, O.J. (1985) “Ellipsometric Study of the Etch-Stop
Mechanism in Heavily Doped Silicon,” J. Electrochem. Soc. 132, pp. 135–41.
Palik, E.D., Faust, J.W., Gray, H.F., and Green, R.F. (1982) “Study of the Etch-Stop Mechanism in Silicon,”
J. Electrochem. Soc. 129, pp. 2051–59.
Palik, E.D., Glembocki, O.J., and Heard, J.I. (1987) “Study of Bias-Dependent Etching of Si in Aqueous
KOH,” J. Electrochem. Soc. 134, pp. 404–9.
Palik, E.D., Glembocki, O.J., and Stahlbush, R.E. (1988) “Fabrication and Characterization of Si
Membranes,” J. Electrochem. Soc. 135, pp. 3126–34.
Palik, E.D., Gray, H.F., and Klein, P.B. (1983) “A Raman Study of Etching Silicon in Aqueous KOH,”
J. Electrochem. Soc. 130, pp. 956–59.
Peeters, E. (1994) Process Development for 3D Silicon Microstructures, with Application to Mechanical
Sensor Design, Ph.D. thesis, Catholic University of Louvain, Belgium.
Peeters, E., Lapadatu, D., Sansen, W., and Puers, B. (1993a) “PHET: An Electrodeless Photovoltaic
Electrochemical Etch-Stop Technique,” in 7th International Conference on Solid-State Sensors and
Actuators (Transducers ’93), Yokohama, pp. 254–57.

© 2006 by Taylor & Francis Group, LLC